SYMPOZIUM A - POKROKOVÁ VÝROBA ŽELEZA A OCELI

Datum: 15.05.2013

Místo konání: Modrý salonek
13:30-17:00

13:30 - 13:45
A1   JEZIERSKI Jan Silesian University of Technology, Gliwice, Poland, EU
Computer Modeling of Pneumatic Powder Injection into Liquid Alloys
13:45 - 14:00
A2   JANSTO Steven CBMM-Reference Metals Company, Bridgeville, United States
Steelmaking and Continuous Casting Process Metallurgy Factors Influencing Hot Ductility Behavior of Niobium Bearing Steels
14:00 - 14:15
A3   KAVIČKA František Vysoké učení technické v Brně, Brno, Czech Republic, EU
Analysis of Breakout of Concast Steel Slab via Criteria of Similarity
14:15 - 14:30
A4   MACHOVČÁK Pavel VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU
The Development of Hollow Ingot Casting Technology at VÍTKOVICE HEAVY MACHINERY a.s.
14:30 - 14:45
A5   MAUDER Tomáš VUT v Brně, Brno, Czech Republic, EU
On-line Fuzzy Regulator for Continuous Casting Process
14:45 - 15:00
A6   BARTOCHA Dariusz Politechnika Śląska, Gliwice, Poland, EU
Influence of Refinement of Primary Cast Steel Structure on Ultrasonic Wave Propagation Velocity
15:00 - 15:15
A7   ŠTĚTINA Josef VUT v Brně, Brno, Czech Republic, EU
Operational Experiences with the Secondary Cooling Modification of Continuous Slab Casting
15:15 - 15:30
A8   KOMÍNEK Jan Vysoké učení technické v Brně, Brno, Czech Republic, EU
Determination of Temperature Dependent Cooling Intensity for the Simulation of In-line Heat Treatment
15:30 - 15:45
A9   KLIMEŠ Lubomír Vysoké učení technické v Brně, Brno, Czech Republic, EU
Parallel Dynamic Solidification Model of Continuous Steel Casting on GPU
15:45 - 16:00
A10   ROSYPALOVÁ Silvie VSB - Technical university of Ostrava, Ostrava, Czech Republic, EU
Modeling Viscosity and Surface Tension of CaO - Al2O3 - SiO2 System
16:15 - 16:30
A11   SMIRNOV Yevgeny Donetsk nation technical university, Donetsk, Ukraine
Modeling of Melt Flow and Solidification in the Twin-Roll Strip Casting Process
16:30 - 16:45
A12   BUTNARIU Ioana University POLITEHNICA of Bucharest, Bucharest, Romania, EU
Establishment of Process Parameters and Technology Working Electric Arc Thermal Spraying of Composite Materials
16:45 - 17:00
A13   OMRANIAN Mohammadi Peiman Islamic Azad University, Amol, Iran, Islamic Republic of
Using the Sponge Iron for Casting of Ductile Iron with Reducing the Cost

Datum: 16.05.2013

Místo konání: Modrý salonek
9:00-11:45

09:00 - 09:15
A14   TKADLEČKOVÁ Markéta VŠB - Technická univerzita, Ostrava, Czech Republic, EU
The Effect of Boundary Conditions of Casting on Size of Macrosegregation in Heavy Steel Ingots
09:15 - 09:30
A15   STAWARZ Marcin Politechnika Śląska, Gliwice, Poland, EU
Influence of Technological Parameters on the Microstructure of the Silicon Cast Iron
09:30 - 09:45
A16   BUČEK Pavol ŽP VVC s.r.o., Podbrezová, Slovakia, EU
Advanced Identification and Control Strategies for Secondary Cooling Zone in Continuous Casting of Steel as Distributed Parameter System
09:45 - 10:00
A17   HUDZIECZEK Zbyněk MATERIÁLOVÝ A METALURGICKÝ VÝZKUM s.r.o., Ostrava, Czech Republic, EU
Tundish Design for VPIM Device
10:00 - 10:15
A18   DOBROVSKÁ Jana VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU
Influence of Segregation Processes on Solidification Temperature of Steels
10:15 - 10:30
A19   GRYC Karel VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU
Comparison of Thermal Analysis Results with the Theoretical Determination of Solidus and Liquidus Temperatures for Specific Steel Grade
10:30 - 10:45
A20   MAŠLEJOVÁ Alica U.S.Steel Kosice s.r.o., Košice, Slovakia, EU
Utilization of Biomass in Ironmaking
11:00 - 11:15
A21   IVANOVA Anna Institute of Applied Mathematics and Mechanics of NASU, Donetsk, Ukraine
Model Predictive Control of Secondary Cooling Modes in Continuous Casting
11:15 - 11:30
A22   WALASEK Agnieszka Silesian University of Technology , Gliwice, Poland, EU
The Description of the Mechanism for the Alloy Layer forming Process based on the Experimental Examination
11:30 - 11:45
A23   SOCHA Ladislav VYSOKÁ ŠKOLA BÁŇSKÁ-TECHNICKÁ UNIVERZITA OSTRAVA, Ostrava, Czech Republic, EU
Evaluation of Influence of Fluxing Agents based on Al2O3 on Slag Mode and Process of Steel Desulphurization in EAF

Datum: 17.05.2013

Místo konání: Modrý salonek
8:30-9:45

08:30 - 08:45
A24   KORBÁŠ Martin VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU
Evaluation of the Results of Steel Purity Achieved in Steel Production using SSE Method
08:45 - 09:00
A25   MASARIK Miloš EVRAZ VÍTKOVICE STEEL, a.s., Ostrava, Czech Republic, EU
Checking the System of Quality Prediction in Concast Equipment when Producing Microlloyed Steels.
09:00 - 09:15
A26   KURKA Vladislav Material and Metallurgical Reseach Ltd., Ostrava, Czech Republic, EU
Effect of Selenium on Metallographic Purity and Formability
09:15 - 09:30
A27   LAKOMÁ Renáta CIREX s.r.o., Kopřivnice, Czech Republic, EU
Possibilities for Quality Control of Casting Products
09:30 - 09:45
A28   SEBZDA Wojciech Politechnika Śląska, Gliwice, Poland, EU
Technological Parameters Influence on Continuous Cast Grey Iron