SYMPOZIUM E - NEŽELEZNÉ KOVY A SLITINY

Datum: 15.05.2013

Místo konání: Kongresový sál A
13:30-18:00

13:30 - 13:45
E1   KECHIN Vladimir Vladimir State University, Vladimir, Russian Federation
Physical and Chemical Fundamentals of Creation of Cast Sacrificial Alloys
13:45 - 14:00
E2   PRUSOV Evgeny Vladimir State University, Vladimir, Russian Federation
Influence of Repeated Remeltings on Formation of Structure of Castings from Aluminum Matrix Composite Alloys
14:00 - 14:15
E3   MICHALCOVÁ Alena Vysoká škola chemicko-technologická v Praze, Prague, Czech Republic, EU
Analytical Methods Suitable for Rapidly Solidified Alloys
14:15 - 14:30
E4   VODĚROVÁ Milena VŠCHT Praha, Prague, Czech Republic, EU
Thermal Stability of Rapidly Solidified Al-Fe-X Alloys
14:30 - 14:45
E5   BŘUSKA Marek VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU
Influence of Recycling Casts Aluminium Alloys on the Microstructure and Mechanical Properties
14:45 - 15:00
E6   CHENG Jie Helmholtz-Zentrum Geesthacht, Geesthacht, Germany, EU
Effect of Internal Defects on Tensile Properties of A356 Casting Alloys
15:00 - 15:15
E7   WRÓBEL Tomasz Silesian University of Technology, Gliwice, Poland, EU
Horiozntal contiuous Casting of Al and Al-Si Alloy in Semi-Industrial Conditions
15:15 - 15:30
E8   DÁM Karel VŠCHT v Praze, Prague, Czech Republic, EU
Al-Si-Fe-Mn Based Alloy Prepared by Centrifugal Spraying and Die Forging
15:30 - 15:45
E9   PRŮŠA Filip VŠCHT v Praze, Prague, Czech Republic, EU
Mechanical Properties and Thermal Stability of AlSi-X Based Alloys Prepared by Centrifugal Atomization
15:45 - 16:00
E10   PANFILOV Alexey Vladimir State University, Vladimir, Russian Federation
Current State and Trends of Development of Aluminum Matrix Composite Alloys
16:15 - 16:30
E11   PRZYBYSZEWSKI Bartlomiej Institut fur Leichtbau und Kunststofftechnik, TU Dresden, Dresden, Germany, EU
The Investigation of Mechanical Properties of Aluminium based Metal Matrix Composites at Elevated Temperatures
16:30 - 16:45
E12   MALCZYK Piotr Technical University of Dresden, Dresden, Germany, EU
Influence of Stress Decay Heat Treatment on the Improvement of Mechanical Properties of Aluminium based Metal Matrix Composites
16:45 - 17:00
E13   POP-CALIMANU Marius Politehnica University of Timisoara, Timisoara, Romania, EU
Optimization of Ultrasonic Welding Parameters and Temperature Distribution in Metal Matrix Composite based on Aluminium
17:00 - 17:15
E14   ČERNÝ Ivo SVÚM a.s., Prague, Czech Republic, EU
Effect of Load Asymmetry and Microstructure Orientation on Fatigue Crack Growth in Stable and Threshold Regions in an Aircraft Al 2124-T851 Alloy
17:15 - 17:30
E15   FALTUS Jiří VÚK Panenské Břežany a.s., Odolena Voda, Czech Republic, EU
Influence of Corrosion in NSS on Fatigue Properties of Aluminium Alloys Al-Cu-Mg
17:30 - 17:45
E16   VLACH Martin Univerzita Karlova v Praze, Prague, Czech Republic, EU
Microstructure and Mechanical Properties of the Cold-Rolled Al-Mn and Al-Mn-Sc-Zr Alloys
17:45 - 18:00
E17   POKOVÁ Michaela Univerzita Karlova v Praze, Prague, Czech Republic, EU
Twin-roll Cast Aluminium Alloys Processed by ECAP

Datum: 16.05.2013

Místo konání: Kongresový sál A
8:00-12:15

08:00 - 08:15
E18   LICHÝ Petr VŠB - Technická univerzita, Ostrava, Czech Republic, EU
Thermophysical Properties and Microstructure of Selectected Magnesium Alloys
08:15 - 08:30
E19   KUBÁSEK Jiří VŠCHT v Praze, Prague, Czech Republic, EU
Influence of Mechanical and Thermal Treatment on Mechanical and Biodegradation Properties of Magnesium Alloys
08:30 - 08:45
E20   KNOTEK Vítězslav VŠCHT v Praze, Prague, Czech Republic, EU
Evaluation of Hydriding Parameters in Mg-Ni-Based Alloys Doped with Transition Metals
08:45 - 09:00
E21   BEŇO Jaroslav VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU
Utilization of Ecological Friendly Cores for Magnesium Alloys Castings
09:00 - 09:15
E22   MOLA Renata Kielce University of Technology, Kielce, Poland, EU
Formation of an Mg-Al-Zn Intermetallic Surface Layer on Magnesium
09:15 - 09:30
E23   HRADILOVÁ Monika VŠCHT v Praze, Prague, Czech Republic, EU
Dynamic Recrystallization during Hot Deformation of Mg-Zn-Ca
09:30 - 09:45
E24   ČAPEK Jan Univerzita Karlova v Praze, Prague, Czech Republic, EU
In-situ Neutron Diffraction and Acoustic Emission Investigation of Microstructure Evolution in Magnesium
09:45 - 10:00
E25   ZIMINA Mariia Univerzita Karlova v Praze, Prague, Czech Republic, EU
Comparison of Microstructures and Mechanical Properties of Conventionally Cast and twin-roll Cast AZ31 Magnesium Alloys
10:00 - 10:15
E26   LAPIN Juraj IMMM SAS, Bratislava, Slovakia, EU
The Effect of Microstructure on Mechanical Properties of Single Crystal CMSX 4 Superalloy
10:15 - 10:30
E27   DI GIANFRANCESCO Augusto Centro Sviluppo Materiali, Rome, Italy, EU
IN718: Higher Temperature Application Range for an Old Superalloys
10:30 - 10:45
E28   MÁLEK Jaroslav UJP PRAHA a.s., Prague, Czech Republic, EU
The Influence of Zr on Microstructure of Beta-Titanium Alloys
11:00 - 11:15
E29   NOVÁK Pavel VŠCHT v Praze, Prague, Czech Republic, EU
Powder Metallurgy Preparation of Porous Titanium for Medical Implants
11:15 - 11:30
E30   STRÁSKÝ Josef Univerzita Karlova v Praze, Prague, Czech Republic, EU
Relationship between Elastic Modulus and Strength of Biomedical Titanium Alloys with Nb, Zr, Ta, Fe and Si Content
11:45 - 12:00
E32   TKACHENKO Sergey Brno University of Technology, Brno, Czech Republic, EU
Tribological Properties of TI-SI-ZR Alloys
12:00 - 12:15
E33   GEPREEL Mohamed Abdel-Hady Egypt-Japan University for Science and Technology(E-JUST), New Borg El-Arab City, Alexandria, Egypt
New Ti-alloys with Superior Specific-strength

Datum: 17.05.2013

Místo konání: Kongresový sál A
8:30-12:45

08:30 - 08:45
E34   ČAPEK Jaroslav VŠCHT v Praze, Prague, Czech Republic, EU
Preparation of the NiTi Shape Memory Alloy by the TE-SHS Method - Influence of the Sintering Time
08:45 - 09:00
E35   KLIMOVÁ Alena Institute of Materials and Machine Mechanics SAS, Bratislava, Slovakia, EU
Effect of the Solidification Parameters on the Distribution of the Alloying Elements during Directional Solidification of the Intermetallic Ti-44Al-5Nb-0.2B-0.2C Alloy
09:00 - 09:15
E36   ČEGAN Tomáš VŠB - Technická univerzita, Ostrava, Czech Republic, EU
Directional Solidification and Solidification Behaviour of Gamma-Tial Intermetallics with Higher Carbon Contents
09:15 - 09:30
E37   STANEKOVÁ Hana Institute of Materials & Machine Mechanics SAS, Bratislava, Slovakia, EU
Creep Damage Characterisation of Intermetallic Ti-46Al-8Ta Alloy Under Thermal Cycling Creep
09:30 - 09:45
E38   POPELA Tomáš VŠCHT v Praze, Prague, Czech Republic, EU
Preparation and Properties of Boride Layers ON TiAl Intermetallics
09:45 - 10:00
E39   MENUSHENKOV V.P. National Research Technological University “MISiS”, Ostrava, Czech Republic, EU
Effects of Addition and Heat Treament on the Microstructure and Magnetic Properties of Sintered Nd-Fe-B Magnets
10:15 - 10:30
E40   KOLCHUGINA Natalia VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU
Study of Diamond-like Coating deposited on the Surface of Nd-Fe-B-Type Sintered Magnets
10:30 - 10:45
E41   SKOTNICOVÁ Kateřina VŠB - Technická univerzita, Ostrava, Czech Republic, EU
The Effect of Thermal Stabilization on the Composition, Microstructure and Magnetic Properties of Nd-Fe-B Sintered Magnets
10:45 - 11:00
E42   LASEK Stanislav VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU
Properties of Ni/Cu/Ni and Ni Coatings for Corrosion Protection of NdFeB Base Magnets
11:00 - 11:15
E43   SIDOROV Evgeny Vladimir State university, Vladimir, Russian Federation
Peculiarities of Obtaining Castings of Alloys with Stoichiometric Compositions with Peritectic Transformations
11:15 - 11:30
E44   SZUTER Tomasz Silesian University of Technology, Gliwice, Poland, EU
Investigation of Mechanical Properties of Composite Skeleton Casting
11:30 - 11:45
E45   MUŠÁLEK Radek Ústav fyziky plazmatu AV ĆR, v.v.i., Prague, Czech Republic, EU
Preparation of Multiphase Materials with Spark Plasma Sintering
11:45 - 12:00
E46   AGAOGULLARI Duygu Istanbul Technical University, Istanbul, Turkey
Microstructure and Properties of Nanocrystalline LaB6 Powders Synthesized in a High Energy Planetary Ball Mill
12:00 - 12:15
E47   MAREK Ivo ICT Prague, Prague, Czech Republic, EU
Study on Nanocrystalline Bulk Copper Prepared by Selective Dissolving
12:15 - 12:30
E48   RÍZEKOVÁ TRNKOVÁ Lýdia Slovak University of Technology in Bratislava , Trnava, Slovakia, EU
Influence of the Chemical Composition on the selected Properties of Lead-free Solders
12:30 - 12:45
E49   GURO Vitaliy Institute of general & inorganic chemistry of UAS, Tashkent, Uzbekistan
Wastes of Processing of Metal-bearing Shale Oil of Uzbekistan as Perspective Raw Material for Metallurgy