| 1. |
ADIGUZEL Osman |
Firat University , Elazig, Turkey |
| The Role of Ordering in Shape Memory Behaviour of Beta Phase Alloys - POSTER |
| 2. |
ADJASSOHO Beatrixa |
Vienna University of Technology, Vienna, Austria, EU |
| Controlled Surface Treatment with Machine Hammer Peening |
| Co-authors Ernst KOZESCHNIK, Christoph LECHNER, Christoph HABERSOHN, Stefan GÖSSINGER, Franz HEINDL, Friedrich BLEICHER, Christian BAUER, Manel R. RIPOLL |
| 3. |
AGAOGULLARI Duygu |
Istanbul Technical University, Istanbul, Turkey |
| Microstructural and Mechanical Evaluation of Al-xTiB2 (x=5, 10, 15 wt.%) Composites Fabricated by Cryogenic Milling - POSTER |
| Co-authors BALCI Ozge, GOKCE Hasan, DUMAN Ismail, OVECOGLU M.Lütfi |
| 4. |
AGAOGULLARI Duygu |
Istanbul Technical University, Istanbul, Turkey |
| Microstructure and Properties of Nanocrystalline LaB6 Powders Synthesized in a High Energy Planetary Ball Mill |
| Co-authors BALCI Ozge, DUMAN Ismail, OVECOGLU M.Lütfi |
| 5. |
AKCA Cem |
Yildiz Technical University, Istanbul, Turkey |
| Microstructural Evaluation of Impact Zone of SiC Particulate Reinforced AZ91D Magnesium Alloys under Ballistic Impact on a Specially Designed Gravitational Ballistic Test Apparatus - POSTER |
| Co-authors ERARSLAN Yaman |
| 6. |
AKINCI Akin |
Sakarya University, Sakarya, Turkey |
| The Investigation of AISI 52100 Steel Ball on Alumina Filled Epoxy Material Surface for Determining Tribological Properties - POSTER |
| Co-authors SEN Saduman, YILMAZ Senol, SEN Ugur |
| 7. |
ANDREYACHSHENKO Violetta |
Karaganda State Industrial University, Temirtau, Kazakhstan |
| Tool for Realization Several Plastic Deformation |
| Co-authors NAIZABEKOV Abdrakhman, KLIBER Jiří, KOCICH Radim |
| 8. |
ANDRŠOVÁ Zuzana |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Controlled Shot Peening of ADI/AGI Castings - POSTER |
| Co-authors Skrbek, B., Sejnohova, I. |
| 9. |
ANTONOVA Natalya |
Southern Russia State Technical University, Kamensk-Shakhtinskii, Russian Federation |
| Morphological Characteristics of Aluminium-Comprising Nanoparticles |
| 10. |
ARBUZ Aleksandr |
Karaganda state industrial university, Temirtau, Kazakhstan |
| Combined Process of Helical Rolling with Equal-Channel Angular Pressing - POSTER |
| Co-authors Abdrakhman NAIZABEKOV, Sergey LEZHNEV |
| 11. |
ARBUZ Aleksandr |
Karaganda state industrial university, Temirtau, Kazakhstan |
| Analysis of the Quality of Hot-rolled Steel for Side-members - POSTER |
| Co-authors NAIZABEKOV Abdrakhman, TALMAZAN Vitaliy, KRIVTSOVA Olga, VIVENTSEV Alexandr |
| 12. |
AZBANBAYEV Eldar |
Karaganda State Technical University, Karaganda, Kazakhstan |
| Mathematical Simulation of the Process of Rolling in the Back Taper Rolls |
| Co-authors ISAGULOV Aristotel, ASHKEYEV Zhasulan |
| 13. |
BAKALARCZYK Sebastian |
Lodz University of Technology, Lodz, Poland, EU |
| Managing Innovation in Metallurgy |
| 14. |
BĄKOWSKA-MORAWSKA Urszula |
Wroclaw University of Economics, jelenia Góra , Poland, EU |
| Commercialization Smelter "X" - Key Aspects of Change |
| 15. |
BALA Piotr |
AGH University of Science and Technology, Cracow, Poland, EU |
| The Influence of the Kinetics of Phase Transformations during Tempering on the Microstructure Development in Tool Steel with Different Carbon Content - POSTER |
| 16. |
BARTOCHA Dariusz |
Silesian University of Technology, Gliwice, Poland, EU |
| Influence of Refinement of Primary Cast Steel Structure on Ultrasonic Wave Propagation Velocity |
| Co-authors BARON Czesław, SUCHOŃ Jacek, SZAJNAR Jan |
| 17. |
BAYRAK Günhan |
Sakarya University , Sakarya, Turkey |
| The Effect of Heat Treatment Parameters on Crystallization of Basalt Base Glass Coatings - POSTER |
| Co-authors ERCENK Ediz, SEN Ugur, YILMAZ Senol |
| 18. |
BEDNÁR Roman |
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU |
| Implementation Procedure of Lean Methods in Logistics Processes - POSTER |
| Co-authors VIDOVÁ Helena, HORŇÁKOVÁ Natália |
| 19. |
BEDNÁŘOVÁ Vlasta |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Casting Routes for Porous Metals with Regular and Irregular Structure - POSTER |
| Co-authors LICHÝ P., LÁNA, I., ELBEL,T. |
| 20. |
BELAHSSEN Okba |
University of Tebessa, Tebessa, Algeria |
| Microstructure and Microhardness of Low Alloyed Steel 32CDV13 Nitrided by Plasma - POSTER |
| Co-authors CHALA Abdelouahed, BELAHSSEN Mohamed Hamza, BENRAMACHE Said, BENSAHAL Djamel, CHABANE Foued |
| 21. |
BELYAEV Igor |
Vladimir State University, Vladimir, Russian Federation |
| The Recycling of Metal Waste Production Monocrystal of Permanent Magnets - POSTER |
| Co-authors MOISEEV A.V., STEPANOV A.A., KUTEPOV A.V |
| 22. |
BEŇO Jaroslav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Utilization of Ecological Friendly Cores for Magnesium Alloys Castings |
| Co-authors LICHÝ Petr, CAGALA Michal |
| 23. |
BESTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Innovation in the System of Iron Ore Evaluation - POSTER |
| Co-authors SAMOLEJOVÁ Andrea, JANOVSKÁ Kamila, LAMPA Martin |
| 24. |
BESTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Monitoring the Quality of Suppliers of Input Raw Materials in Metallurgical Production - POSTER |
| Co-authors Milan MIKOLÁŠ , František ZAPLETAL , Jindřich HAVERLAND , Miroslav HENDRYCH |
| 25. |
BEZÁK Tomáš |
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU |
| Surface Roughness Determination using Laser Scanning Confocal Microscope Zeiss LSM 700 |
| Co-authors KUSÝ Martin, ELIÁŠ Michal, KOPČEK Michal |
| 26. |
BÍLEK Pavel |
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU |
| CrAg7N Nanocomposite Coatings Deposited of Cr-V Ledeburitic Steel |
| Co-authors JURČI Peter, HUDÁKOVÁ Mária, BOHOVIČOVÁ Jana, SOBOTOVÁ Jana |
| 27. |
BLACHOVÁ MIKŠOVÁ Marcela |
Hayes Lemmerz Czech , Ostrava, Czech Republic, EU |
| Motivational Potential of Strategic Controlling |
| 28. |
BOBEK Michal |
University of Economics, Prague, Prague, Czech Republic, EU |
| Provisions in the Metallurgical Industry in the Czech Republic |
| 29. |
BOHOVIČOVÁ Jana |
Slovak University of Technology in Bratislava, Bratislava, Slovakia, EU |
| Analysis CrAgN Coating on Vanadis 6 Steel after Pin-on-disc Testing |
| Co-authors Peter JURČI, Mária HUDÁKOVÁ, Ľubomír ČAPLOVIČ, Martin SAHUL, Pavel BÍLEK |
| 30. |
BOROWIECKA-JAMROZEK Joanna |
Kielce University of Technology, Kielce, Poland, EU |
| Microstructure and Properties of Hot Pressed Fe-50 % Co Materials - POSTER |
| 31. |
BOUTASSOUNA Djamal |
University of Laghouat, Laghouat, Algeria |
| Intergranular Fracturing Susceptibility of Metallic Nickel having Small Bulk Content in Sulfur - POSTER |
| Co-authors LE GALL René, LEFKAIER Ibn Khaldoun |
| 32. |
BRANSKÁ Lenka |
University of Pardubice, Pardubice, Czech Republic, EU |
| Is a Joint Owner a Guarantee of Coordinated Efforts of Entities in the Value Network? - POSTER |
| Co-authors Lošťaková Hana, Pecinová Zuzana |
| 33. |
BROŽEK Vlastimil |
ICT in Prague, Prague, Czech Republic, EU |
| Tungsten Coatings and Free Standing Parts - POSTER |
| Co-authors CTIBOR Pavel, MATĚJÍČEK Jiří, WEISS Zdeněk |
| 34. |
BROŽEK Vlastimil |
ICT in Prague, Prague, Czech Republic, EU |
| Improved Corrosion Properties of Plasma Sprayed Ceramics on Carbon Steel with Different Phosphate Interlayers - POSTER |
| Co-authors POKORNÝ Petr, MASTNÝ Libor |
| 35. |
BROŽOVÁ Silvie |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Economical Aspects of High-Temperature Heating Utilization for Industrial Waste Treatment |
| Co-authors INGALDI Manuela |
| 36. |
BRZÓSKA Jan |
Silesian University of Technology, Gliwice , Poland, EU |
| Innovations as a Factor of Business Models Dynamics in Metallurgical Companies - POSTER |
| 37. |
BŘUSKA Marek |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Influence of Recycling Casts Aluminium Alloys on the Microstructure and Mechanical Properties |
| Co-authors LICHÝ Petr, CAGALA Michal, BEŇO Jaroslav, BODROG Miroslav |
| 38. |
BUČEK Pavol |
ŽP VVC Ltd., Podbrezová, Slovakia, EU |
| Advanced Identification and Control Strategies for Secondary Cooling Zone in Continuous Casting of Steel as Distributed Parameter System |
| Co-authors NOGA Pavol, TKÁČ Lukáš, HULKÓ Gabriel |
| 39. |
BURCHART-KOROL Dorota |
Central Mining Institute, Katowice, Poland, EU |
| Sustainability and Eco-Efficiency Assessment of Biomass use in Steelmaking |
| 40. |
BUTNARIU Ioana |
University POLITEHNICA of Bucharest, Bucharest, Romania, EU |
| Establishment of Process Parameters and Technology Working Electric Arc Thermal Spraying of Composite Materials |
| Co-authors BUTNARIU Ilie |
| 41. |
CRISTEA Lidia |
Romanian University of Science and Arts, Bucharest, Romania, EU |
| Aspects Concerning the Technological Process of the Electrolytic Lead Refining. - POSTER |
| Co-authors CRISTEA Enona |
| 42. |
CUTEAN Elena Simona |
“Politehnica” University of Timisoarara, Timisoara, Romania, EU |
| Mechanical Compatibility of Ti Coatings Deposited by HVOF Thermal Spraying - POSTER |
| Co-authors MITELEA Ion, SERBAN Viorel Aurel , CORNEA Florin Marian |
| 43. |
ČÁMSKÁ Dagmar |
University of Economics in Prague, Prague, Czech Republic, EU |
| Development of Value Productivity in Metallurgical Industry |
| Co-authors KLEČKA Jiří |
| 44. |
ČAPEK Jan |
Charles University in Prague, Prague, Czech Republic, EU |
| In-situ Neutron Diffraction and Acoustic Emission Investigation of Microstructure Evolution in Magnesium |
| Co-authors MÁTHIS Kristián, BERAN Přemysl, LUKÁŠ Petr, VRÁTNÁ Jitka |
| 45. |
ČAPEK Jaroslav |
ICT in Prague, Prague, Czech Republic, EU |
| Preparation of the NiTi Shape Memory Alloy by the TE-SHS Method - Influence of the Sintering Time |
| Co-authors KUČERA Vojtěch, FOUSOVÁ Michaela, VOJTĚCH Dalibor |
| 46. |
ČEGAN Tomáš |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Directional Solidification and Solidification Behaviour of Gamma-Tial Intermetallics with Higher Carbon Contents |
| Co-authors KURSA Miroslav |
| 47. |
ČECH Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Ant Colony Optimization: Survey on Applications in Metallurgy - POSTER |
| Co-authors VILAMOVÁ Šárka |
| 48. |
ČEP Robert |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Feed Speed on Machined Surface Quality - POSTER |
| Co-authors PETRŮ Jana, ZLÁMAL Tomáš, VALÍČEK Jan, HARNIČÁROVÁ Marta, JANÁSEK Adam, ČEPOVÁ Lenka |
| 49. |
ČERMÁK Jiří |
IPM AS CR, v.v.i., Brno, Czech Republic, EU |
| Initial Stage of Mutual Diffusion of Carbide in Iron - POSTER |
| Co-authors KRÁL Lubomír |
| 50. |
ČERMÁK Jiří |
IPM AS CR, v.v.i., Brno, Czech Republic, EU |
| Comparison of Diffusion Coefficients in Initial Stages of Mutual Diffusion in Layered Structures Carbon/Ferrite and Carbon/Austenite for Chosen Alloys - POSTER |
| Co-authors KRÁL Lubomír |
| 51. |
ČERNÝ Ivo |
SVÚM a.s., Prague, Czech Republic, EU |
| Evaluation of Effects of Laser Hardening on Fatigue Resistance of 42CrMo4 Steel |
| Co-authors MIKULOVÁ Dagmar, SÍS Jiří |
| 52. |
ČERNÝ Ivo |
SVÚM a.s., Prague, Czech Republic, EU |
| Effect of Load Asymmetry and Microstructure Orientation on Fatigue Crack Growth in Stable and Threshold Regions in an Aircraft Al 2124-T851 Alloy |
| 53. |
ČESÁNEK Zdeněk |
VZU Plzen, Plzeň, Czech Republic, EU |
| Comparison of Abrasive Wear Resistance between HVOF Thermally Sprayed Alloy-Based and Cermet Coatings - POSTER |
| Co-authors HOUDKOVÁ Šárka, SCHUBERT Jan, KAŠPAROVÁ Michaela |
| 54. |
ČÍŽEK Petr |
MATERIAL AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU |
| Fatigue and Fracture Properties of Heterogeneous Weld Joint 22K - 08CH18N10T |
| Co-authors KANDER Ladislav, MATOCHA Karel |
| 55. |
DÁM Karel |
ICT in Prague, Prague, Czech Republic, EU |
| Al-Si-Fe-Mn Based Alloy Prepared by Centrifugal Spraying and Die Forging |
| Co-authors VOJTĚCH Dalibor |
| 56. |
DAVID Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Support for Maintenance and Technology Control on Slab Device of Continuous Casting |
| Co-authors ŠVEC P., FRISCHER R. |
| 57. |
DEMIAN Mihai |
University of Craiova, Craiova , Romania, EU |
| Research Regarding the use of CO2 at the Sintered Steels Quenching - POSTER |
| Co-authors Mangra Mihail, Demian Gabriela, Dubovan Sandu |
| 58. |
DEPCZYŃSKI Wojciech |
Kielce University of Technology, Kielce, Poland, EU |
| Properties of Electro-spark Deposited Stellite Coating on Mild Steel - POSTER |
| 59. |
DI GIANFRANCESCO Augusto |
Centro Sviluppo Materiali S.p.A., Rome, Italy, EU |
| IN718: Higher Temperature Application Range for an Old Superalloys |
| Co-authors NERI Stefano, CALDERINI Massimo, FORONI Luca, MONTANI Raimondo |
| 60. |
DLUGOŠOVÁ Ivana |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Checking and Controlling in the System of Human Resources Management of Industrial Enterprise - POSTER |
| 61. |
DLUHOŠOVÁ Dana |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Companies Financial Performance Determanitation Applying the Data Envelopment Analysis (DEA) Method - POSTER |
| Co-authors ZMEŠKAL Zdeněk |
| 62. |
DOBROVSKÁ Jana |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Influence of Segregation Processes on Solidification Temperature of Steels |
| Co-authors SMETANA Bedřich, DOBROVSKÁ Věra, STRÁNSKÝ Karel, FRANCOVÁ Hana, ŽALUDOVÁ Monika |
| 63. |
DOHNAL Ivo |
Brno University of Technology, Brno, Czech Republic, EU |
| Capacitance Detectors used for Split Hopkinson Pressure Bar Test (SHPBT) and their Comparison with Numeric Simulation SHPBT |
| Co-authors ŠLAIS Miroslav, FOREJT Milan |
| 64. |
DOMOVCOVÁ Lucia |
ŽP VVC Ltd., Podbrezová, Slovakia, EU |
| Chemical and Structural Concepts of Creep-Resistant Steels with Polyedric Microstructure - POSTER |
| Co-authors PARILÁK Ľudovít |
| 65. |
DOUBEK Pavel |
Technical univerzity of Liberec, Liberec, Czech Republic, EU |
| Springback Analysis at Free Bending by Contact-less Optical Systems - POSTER |
| Co-authors SOLFRONK Pavel, SOBOTKA Jiří, KOLNEROVÁ Michaela, ZUZÁNEK Lukáš |
| 66. |
DRÁPALA Jaromír |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Theoretical Study of Interaction of Elements in Iron Binary Systems - POSTER |
| Co-authors BROŽOVÁ Silvie, MADAJ Michal |
| 67. |
DROZDOVÁ Zita |
Halla-Visteon Climate Control Corporation, Nový Jičín, Czech Republic, EU |
| Corrosion Resistance of Wrought Aluminum Alloys Utilized in Environments Containing Automotive Exhaust Gases |
| 68. |
ĎURČÍK Roman |
ŽP VVC Ltd., Podbrezova, Slovakia, EU |
| Monitoring of Geometric Failures of the Hot-Rolled Seamless Tubes at the Stretch-Reducing Mill by using Numerical Simulation - POSTER |
| Co-authors PARILÁK Ľudovít |
| 69. |
DZIURKA Rafal |
AGH University of Science and Technology, Cracow, Poland, EU |
| Effect of Heating Rate on Phase Transformations during Tempering of Mn-Cr-Mo Alloy Steels - POSTER |
| Co-authors PACYNA Jerzy |
| 70. |
ELIÁŠOVÁ Ivana |
ÚJV Řež, a. s., Prague, Czech Republic, EU |
| Implementation of Perspective Test Methods for Evaluation of Mechanical Properties of Irradiated NPP`s Structural Materials - POSTER |
| Co-authors KOPŘIVA Radim |
| 71. |
ERİŞİR Ersoy |
University of Kocaeli , Kocaeli, Turkey |
| A Study of Microstructure and Phase Transformations of Medium Carbon Dual Phase Steels |
| Co-authors BILIR Oğuz Gürkan |
| 72. |
ERİŞİR Ersoy |
University of Kocaeli , Kocaeli, Turkey |
| Microstructural Characterization of Medium Carbon Dual Phase Steels after Intermediate Quenching |
| Co-authors GÜMÜŞ Serap, BILIR Oğuz Gürkan |
| 73. |
EVIN Emil |
Technical university of Kosice, Košice, Slovakia, EU |
| Desing of High Strength Steel Sheets for Autobody |
| 74. |
FABÍK Richard |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Influence of Technological Conditions of Drawing on Inhomogeneity of Deformation under Conditions of Hydro-dynamic Lubrication |
| 75. |
FABÍK Richard |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Analysis of Results of Testing of Wire by Reverse Bending from the Viewpoint of Normality of the Measured Data - POSTER |
| Co-authors JONŠTA Petr |
| 76. |
FALTUS Jiří |
VÚK Panenské Břežany a.s., Odolena Voda, Czech Republic, EU |
| Influence of Corrosion in NSS on Fatigue Properties of Aluminium Alloys Al-Cu-Mg |
| Co-authors VRÁTNÁ Jitka |
| 77. |
FARKAS Gergely |
Charles University , Prague, Czech Republic, EU |
| Study of deformation mechanisms of a Mg-Al-Sr alloy reinforced with short Saffil® fibers - POSTER |
| Co-authors MÁTHIS Kristián, JANEČEK Miloš, CHOE Heeman |
| 78. |
FAYÇAL Hadj Larbi |
University of Sciences and Technology Houari Boumediene, Algiers, Algeria |
| DSC Analysis of CuNiSi Alloy after ECAP Processing - POSTER |
| Co-authors ABIB K., KHEREDDINE Y., ALILI B., KAWASAKI M., BRADAI D. & LANGDONC T.G. |
| 79. |
FEDOROVÁ Michaela |
TnUAD in Puchov, Púchov, Slovakia, EU |
| Corrosion Resistance OF Coated and Uncoated Materials in the Glass Industry |
| Co-authors TALAŠ Rastislav, PEŠLOVÁ Františka, OBUCHVÁ Miroslava |
| 80. |
FELICIANO-BRUZUAL Cristobal |
Macquarie University, Sydney, Australia |
| Charcoal Injection in Blast Furnace (Part I): Bio-PCI Fundaments, CO2 Mitigation Potential, Benefits and Limitations - POSTER |
| Co-authors MATTHEWS John A. |
| 81. |
FELICIANO-BRUZUAL Cristobal |
Macquarie University, Sydney, Australia |
| Charcoal Injection in Blast Furnace (Part II): Economics of Charcoal Making and Deployment - POSTER |
| Co-authors MATTHEWS John A. |
| 82. |
FELIKS Jerzy |
AGH University of Science and Technology, Cracow, Poland, EU |
| Production Logistics Concepts and Systems in Metallurgical Companies - POSTER |
| Co-authors Radim LENORT |
| 83. |
FOLTA Martin |
Skoda auto university, Mladá Boleslav, Czech Republic, EU |
| Vulnerability of Industrial Supply Chain - POSTER |
| Co-authors NOVOTNÝ Petr |
| 84. |
FRISCHER Robert |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Usage of Clustering Analysis in Diagnostics of Metallurgical Devices - POSTER |
| Co-authors POLLAK M., TUHÝ T., PRAŽÁKOVÁ V. |
| 85. |
FRISCHEROVÁ Lucie |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Maintenance Management of Metallurgical Processes - POSTER |
| Co-authors DAVID J., GARZINOVÁ R. |
| 86. |
GAUDE-FUGAROLAS Daniel |
Independent Research in Physical Metallurgy and Engineering, Vilassar de Mar, Spain, EU |
| Effect of Microstructure and Trap Typology on Hydrogen Redistribution in Steel - POSTER |
| 87. |
GEPREEL Mohamed Abdel-Hady |
Egypt-Japan University for Science and Technology, New Borg El-Arab City, Alexandria, Egypt |
| New Ti-alloys with Superior Specific-strength |
| Co-authors NIINOMI Mitsuo |
| 88. |
GIDEON Barry |
CORRMET Ltd., Perth, Australia |
| Corrosion Behaviour of 316L, 317L Stainless Steel and Alloy 825 (UNS N08825) Liner Material for Clad Pipe for Offshore Application - POSTER |
| 89. |
GOLAB Rafal |
AGH University of Science and Technology, Cracow, Poland, EU |
| Development of the Complex Austenite – Ferrite Transformation Model based on CA Method |
| Co-authors MADEJ Lukasz |
| 90. |
GOUDA K. Mohammed |
Egypt-Japan University for Science and Technology(E-JUST), New Borg El-Arab City, Alexandria, Egypt |
| Effect of Mn-Content on the Phases Stability of Binary Ti-Mn Alloys - POSTER |
| Co-authors Mohamed Abdel-Hady Gepreel, A. Abd El Moeium |
| 91. |
GRABAN Juraj |
U.S.Steel Košice, s.r.o. , Košice, Slovakia, EU |
| Influence of Coatings´Chemical Composition on Corrosion Resistance of Galvanized Steel - POSTER |
| Co-authors Mária KOLLÁROVÁ, Peter ZIMOVČÁK, Viera KOHÚTEKOVÁ, František HOLLÝ, Ivor KUČERA |
| 92. |
GRAKOVA Ekaterina |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Utilization of Simulation Software of Resilience Supply Chains - POSTER |
| Co-authors KRAUSOVÁ Emilie |
| 93. |
GREGER Miroslav |
VSB-Technical University Ostrava, Ostrava, Czech Republic, EU |
| Development of Microstructure and Mechanical Properties of Austenitic Stainless Steel after ECAP Deformation - POSTER |
| Co-authors KANDER Ladislav |
| 94. |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Analysis of New Technology Forging Monolithic Forged Bottoms - POSTER |
| Co-authors PETRŽELA Jiří, LÁSZLÓ Vladimír, JUHAS Miroslav |
| 95. |
GROZA Cosmin |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Modelling of Nd-YAG Continuously Laser Welding Process of Ti6Al4V and X5CrNi18-10 using Factorial Design - POSTER |
| Co-authors BUZDUGAN Dragos, MITELEA Ion |
| 96. |
GRYC Karel |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Comparison of Thermal Analysis Results with the Theoretical Determination of Solidus and Liquidus Temperatures for Specific Steel Grade |
| Co-authors SMETANA Bedřich, TKADLEČKOVÁ Markéta, ŽALUDOVÁ Monika, SOCHA Ladislav, MICHALEK Karel, DOBROVSKÁ Jana, VÁLEK Ladislav, PACHLOPNIK Radim, JANISZEWSKI Krystian |
| 97. |
GUBENCU Dinu |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Study of the Factors Influence on the Objective Functions of Wire EDM of AA2124/SiC/25p - POSTER |
| Co-authors POP-CALIMANU Marius |
| 98. |
GURO Vitaliy |
Institute of General & Inorganic Chemistry of UAS, Tashkent, Uzbekistan |
| Wastes of Processing of Metal-bearing Shale Oil of Uzbekistan as Perspective Raw Material for Metallurgy |
| 99. |
GUSETORIU Ionela Ramona |
Politehnica of Timisoara, Timisoara, Romania, EU |
| Stress Risk in Management Systems in Metallurgical Problems - POSTER |
| Co-authors TUCU Dumitru |
| 100. |
HAJDUGA Maciej |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
| Bacteria as the One of Menace to Human Live in Sanitary Ambulances |
| Co-authors JEDRZEJCZYK Dariusz |
| 101. |
HAJDUGA Maciej |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
| The Influence of the Kind of Surface Treatment on the Wear of Machines Elements Applied in the Textile Industry |
| Co-authors JEDRZEJCZYK Dariusz |
| 102. |
HÁJEK Jiří |
University of Economics, Prague, Prague, Czech Republic, EU |
| Main Trends in Financial Health among Companies Related to Metallurgical Industry in Central Europe |
| Co-authors Dagmar ČÁMSKÁ |
| 103. |
HÁJKOVÁ Pavlína |
Czech Technical University in Prague, Prague, Czech Republic, EU |
| Optimization of Materials for Blades of Water Turbines - POSTER |
| Co-authors KRUM Stanislav, HOLEC Jan, ANISIMOV Evgeniy, MEZZAROBA ECKL Carlos, PEŠLOVÁ Františka, CEJP Jiří |
| 104. |
HALFA Hossam |
Central Metallurgical R&D Institute, Cairo, Egypt |
| Electroslag Remelted Ultra- High Strength High Ductility Martensitic Steel - POSTER |
| 105. |
HALFAROVÁ Petra |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| The Application of Fuzzy FMEA - POSTER |
| Co-authors USTYUGOVA Tatiana, VYKYDAL David |
| 106. |
HAMPL Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Metallurgical Processing of Cast Irons and Oxygen Activity. - POSTER |
| Co-authors VÁLEK Tomáš |
| 107. |
HANNACHI Mohamed Tahar |
University of Cheikh Larbi Tébessi, Tébessa, Algeria |
| Optimization of Parameters of Welding Steel Tubes by High-frequency Induction - POSTER |
| Co-authors Hamid DJEBAIL |
| 108. |
HARCUBA Petr |
Charles University in Prague, Prague, Czech Republic, EU |
| Mechanical Properties and Microstructure Evolution of Ultrafinegrained CP Ti - POSTER |
| Co-authors HÁJEK Michal, ZHÁŇAL Pavel |
| 109. |
HARNIČÁROVÁ Marta |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Surface Intergrity Analysis in Laser Beam Cutting Process - POSTER |
| Co-authors VALÍČEK Jan, ČEP Robert, PETRŮ Jana & ČEPOVÁ Lenka |
| 110. |
HAVLÍČEK Petr |
DT - Výhybkárna a strojírna, a.s., Prostějov, Czech Republic, EU |
| Wear of the Railway Turnout Frogs Made of Explosive Hardened Hadfield Steel |
| Co-authors ZBOŘIL Josef |
| 111. |
HAVLÍK Petr |
Brno University of Technology, Brno, Czech Republic, EU |
| Electron Beam Welds of Austenitic Stainless steels and Ods Steels - POSTER |
| Co-authors ŠOHAJ Pavel |
| 112. |
HEGER Milan |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Possibility of Continuous Reheating Furnaces Control using Simplified Models |
| Co-authors ŠPIČKA Ivo, FRANZ Jiří |
| 113. |
HERMANOVÁ Šárka |
VITKOVICE POWER ENGINEERING a., Ostrava, Czech Republic, EU |
| The Effect of Cold Deformation on the Properties of New Austenitic Stainless Steel for Boilers Superheater Tubes - POSTER |
| Co-authors DOBROVODSKÁ Lenka, KANDER Ladislav |
| 114. |
HODEK Josef |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| FEM Model and Experimental Production Titanium Rods using Conform Machine |
| Co-authors KUBINA Tomáš, DLOUHÝ Jaromír |
| 115. |
HOLEŠINSKÝ Jan |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Precipitation Processes in AISI 316LN + Nb Steels during Creep at 600 °C |
| Co-authors VODÁREK Vlastimil |
| 116. |
HOUDKOVÁ Šárka |
Research and Testing Institute Plzen, Pilsen, Czech Republic, EU |
| Spraying Parameters Study of HVOF Coatings, Based on CrC |
| Co-authors ČESÁNEK Zdeněk, KAŠPAROVÁ Michaela, SCHUBERT Jan |
| 117. |
HOUDKOVÁ Šárka |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| Comparison of NiCrBSi Coatings, HVOF Sprayed, Re-Melted by Flame and by High-Power Laser |
| Co-authors SMAZALOVÁ Eva, VOSTŘÁK Marek, HRUŠKA Matěj, ČESÁNEK Zdeněk, SCHUBERT Jan |
| 118. |
HRABOVSKÝ Jozef |
Brno University of Technology, Brno, Czech Republic, EU |
| Estimation of Fracture Toughness of the Oxide Scales |
| Co-authors LOŠÁK Petr, HORSKÝ Jaroslav |
| 119. |
HRADILOVÁ Monika |
ICT in Prague, Prague, Czech Republic, EU |
| Dynamic Recrystallization during Hot Deformation of Mg-Zn-Ca |
| Co-authors LEJČEK Pavel |
| 120. |
HRUŠKA Matěj |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| Standard and Scanning Laser Hardening Procedure |
| Co-authors VOSTŘÁK Marek, SMAZALOVÁ Eva, ŠVANTNER Michal |
| 121. |
HRYNIEWICZ Tadeusz |
Koszalin University of Technology, Koszalin, Poland, EU |
| Magnetoelectropolishing – A New Trend in Surface Finishing - POSTER |
| Co-authors ROKOSZ Krzysztof |
| 122. |
HUDZIECZEK Zbyněk |
Material and Metallurgical Reseach Ltd., Ostrava, Czech Republic, EU |
| Tundish Design for VPIM Device |
| Co-authors KURKA Vladislav, PINDOR Jaroslav, CIENCIALA Jiří |
| 123. |
HULICIUS Eduard |
Institute of Physics, AS CR, v.v.i., Prague, Czech Republic, EU |
| Nanotechnology in General and Quantum Dots as an Interesting Example - INVITED LECTURE |
| 124. |
HYRCZA-MICHALSKA Monika |
Silesian University of Technology, Gliwice, Poland, EU |
| The Use of Computer Techniques to Evaluate the Drawability of the Thin Sheet Metal - POSTER |
| 125. |
CHABIČOVSKÝ Martin |
Brno University of Technology, Brno, Czech Republic, EU |
| Experimental Investigation of Spray Cooling of Horizontally and Vertically Oriented Surfaces - POSTER |
| Co-authors RAUDENSKÝ Miroslav |
| 126. |
CHENG Jie |
Helmholtz-Zentrum Geesthacht, Geesthacht, Germany, EU |
| Effect of Internal Defects on Tensile Properties of A356 Casting Alloys |
| Co-authors Norbert HORT, Karl Ulrich KAINER, Siyoung KWAK |
| 127. |
CHOBOT Karel |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Multi-Criteria Decision-making in Management under Conditons of Risk and Uncertainty - POSTER |
| 128. |
CHOBOT Karel |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Assessment of Energy Dissipation at Initiation Moment of Fracture Process of Low–carbon Steel - POSTER |
| Co-authors KRAUS Martin |
| 129. |
CHOCHOLATÝ Ondřej |
Univesity of West Bohemia, Pilsen, Czech Republic, EU |
| Effect of filler on the surface roughness of hard chromium composite coating |
| Co-authors KŘÍŽ Antonín, KLUFOVÁ Pavla, DEVERA Tomáš |
| 130. |
CHOTĚBORSKÝ Rostislav |
Czech University of Life Sciences in Prague, Prague, Czech Republic, EU |
| Effect of Rare Earth Additions on the Microstructures and Properties of Fe-B Cast Steel - POSTER |
| Co-authors BRYKSÍ STUNOVÁ Barbora, KOLAŘÍKOVÁ Marie |
| 131. |
INGALDI Manuela |
Częstochowa University of Technology, Czestochowa, Poland, EU |
| Workers Evaluations of Ribbed Wire Competition and Rolling Mill Technological Possibilities - POSTER |
| Co-authors BORKOWSKI Stanisław |
| 132. |
INGALDI Manuela |
Częstochowa University of Technology, Czestochowa, Poland, EU |
| Economy and Possibilities of Waste Utilization in Poland |
| Co-authors JURSOVÁ Simona |
| 133. |
IVANOVA Anna |
National Academy of Sciences of Ukraine, Donetsk, Ukraine |
| Model Predictive Control of Secondary Cooling Modes in Continuous Casting |
| 134. |
JABLONSKÁ Eva |
Institute of Chemical Technology in Prague, Prague, Czech Republic, EU |
| The in Vitro Effect of Alloying Elements used in Biodegradable Magnesium Implants on Eukaryotic Cell Metabolism - POSTER |
| Co-authors KUBÁSEK Jiří, SCHWARZ Marek, LIPOV Jan, VOJTĚCH Dalibor, RUML Tomáš |
| 135. |
JAGUSIAK-KOCIK Marta |
Częstochowa University of Technology, Częstochowa, Poland, EU |
| Determination of the Technology Place in the Metal Company on the Basis of the Toyota’s Management Principles |
| Co-authors BORKOWSKI Stanisław, ROSAK-SZYROCKA Joanna, KLIMECKA-TATAR Dorota, JAGUSIAK-KOCIK Marta, SYGUT Piotr |
| 136. |
JAGUSIAK-KOCIK Marta |
Częstochowa University of Technology, Częstochowa, Poland, EU |
| Process Management in the Cast Iron Foundry - POSTER |
| Co-authors BORKOWSKI Stanisław, ULEWICZ Robert, SELEJDAK Jacek, JAGUSIAK-KOCIK Marta |
| 137. |
JAKUBÉCZYOVÁ Dagmar |
IMR SAS, Košice, Slovakia, EU |
| A Study of PVD Mono- and Multicomponent Thin Coatings for Tools Applications |
| Co-authors KOČÍK Marek, HVIZDOŠ Pavol |
| 138. |
JANČÍKOVÁ Zora |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Prediction of Internal Defects in Rolled Products from Cr-Mo Steels using Artificial Intelligence Methods - POSTER |
| Co-authors ZIMNÝ Ondřej, KVÍČALA Miroslav, KOŠTIAL Pavel |
| 139. |
JANOVSKÁ Kamila |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Innovations in Czech Metallurgical Plants - POSTER |
| Co-authors SAMOLEJOVÁ Andrea, LAMPA Martin, GAJDA Jakub, VILAMOVÁ Šárka, KUTÁČ Josef, VOZŇÁKOVÁ Iveta |
| 140. |
JANSTO Steven |
CBMM-Reference Metals Company, Bridgeville, United States |
| Steelmaking and Continuous Casting Process Metallurgy Factors Influencing Hot Ductility Behavior of Niobium Bearing Steels |
| 141. |
JECH David |
Brno University of Technology, Brno, Czech Republic, EU |
| Structural Stability of Plasma Sprayed CoNiCrAlY – ZrO2+Y2O3 Thermal Barrier Coatings after Isothermal Exposure at 1050 °C |
| Co-authors ČELKO Ladislav, KLAKURKOVÁ Lenka, HUTAŘOVÁ Simona, JULIŠ Martin, ŠVEJCAR Jiří |
| 142. |
JEZIERSKI Jan |
Silesian University of Technology, Gliwice, Poland, EU |
| Computer Modeling of Pneumatic Powder Injection into Liquid Alloys |
| Co-authors BULIŃSKI Zbigniew, JANERKA Krzysztof |
| 143. |
JONŠTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Effect of Steel Purity on Rotor Degradation - POSTER |
| Co-authors HEIDE Roman, JONŠTA Zdeněk, GABČOVÁ Miriam, JANDOŠ František |
| 144. |
JOSKA Luděk |
ICT in Prague, Prague, Czech Republic, EU |
| Zirconium Alloyed DLC Layers for Biomedical Applications |
| Co-authors FOJT Jaroslav, MORAVEC Hynek |
| 145. |
JURASZ Zbigniew |
Automotive Research & Development Institute BOSMAL, Bielsko-Biała, Poland, EU |
| Comparision Analysis of Corrosion Resistance of Valve Steels - POSTER |
| Co-authors ADAMASZEK Krzysztof |
| 146. |
JURČI Peter |
SUT in Bratislava, FMST in Trnava, Trnava, Slovakia, EU |
| Tempering Response of Sub-Zero Processed Cr-V Ledeburitic Steel Vanadis |
| Co-authors ZAHRADNÍK Juraj, SALABOVÁ Petra, PRIKNER Otakar |
| 147. |
JURCHELA Alin Dan |
“Politehnica” University of Timisoara, Timisoara, Romania, EU |
| Microstructure and Cavitation Erosion Resistance for Stainless Steels with 12 % Chromium and Variable Nickel Concentrations - POSTER |
| Co-authors BORDEASU Ilare, MITELEA Ion, OANCA Octavian |
| 148. |
JURSOVÁ Simona |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Energy Exploitation of Industrial Waste |
| Co-authors PUSTĚJOVSKÁ Pavlína, BROŽOVÁ Silvie |
| 149. |
JURSOVÁ Simona |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Economic Benefits of Raw Materials Reducibility Testing - POSTER |
| Co-authors BILÍK Jiří |
| 150. |
KAFRÍK Ján |
Alexander Dubček University of Trencin, Púchov, Slovakia, EU |
| Hot Corrosion Behaviour of Cr Modified Aluminide Coatings deposited on Nickel Superalloy in 713 LC - POSTER |
| Co-authors KIANICOVÁ Marta, TRNÍK Jaroslav, DVOŘÁČEK Ondřej |
| 151. |
KANDER Ladislav |
MATERIAL AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU |
| Structure and Properties of A508 Gr.4N Class 3 Grade Steel - POSTER |
| Co-authors STEJSKALOVA Šárka, ČÍŽEK Petr, ŠMÁTRALOVÁ Magdalena |
| 152. |
KARABENCIOV Adrian |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Correlations between Cavitation Erosion Resistance and Mechanical Properties for Stainless Steel with 10% Nickel and Variable Concentrations of Chromium - POSTER |
| Co-authors BORDEAȘU Ilare, MITELEA Ion, OANCA Octavian |
| 153. |
KARDAS Edyta |
Czestochowa University of Technology, Czestochowa, Poland, EU |
| Situation in Waste Treatment in Poland |
| Co-authors BROŽOVA Silvie |
| 154. |
KATONA Stefan-Eusebiu |
"Politehnica" University of Timisoara, Timisoara, Romania, EU, Timisoara, Romania, EU |
| Influence of the Solution Treatment Temperature upon the Cavitation Erosion Resistance for 17-4 P.H. Stainless Steel - POSTER |
| Co-authors BORDEASU Ilare, MITELEA Ion |
| 155. |
KAVIČKA František |
Brno University of Technology, Brno, Czech Republic, EU |
| Analysis of Breakout of Concast Steel Slab via Criteria of Similarity |
| Co-authors STRÁNSKÝ Karel, DOBROVSKÁ Jana, SEKANINA Bohumil, ŠTĚTINA Josef, MASARIK Miloš |
| 156. |
KAWULOK Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Chemical Composition on Spreading of Steel at Hot Longitudinal Rolling |
| Co-authors CZERNEK Stanislav, SCHINDLER Ivo, KAWULOK Rostislav, RUSZ Stanislav, SOLOWSKI Zdeněk, ČMIEL Karel Milan |
| 157. |
KAWULOK Rostislav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Model of Hot Deformation Resistance of the Iron Aluminide of the Type Fe-40at.%Al - POSTER |
| Co-authors OPĚLA Petr, SCHINDLER Ivo, KAWULOK Petr |
| 158. |
KECHIN Vladimir |
Vladimir State University, Vladimir, Russian Federation |
| Physical and Chemical Fundamentals of Creation of Cast Sacrificial Alloys |
| 159. |
KEJZLAR Pavel |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Assessment of the Structure and High Temperature Strength of Fe-35Al-5Zr Intermetallic Alloy - POSTER |
| Co-authors MACAJOVÁ Eva, VOLESKÝ Lukáš, KRATOCHVÍL Petr |
| 160. |
KEKULE Tomáš |
Charles University in Prague, Prague, Czech Republic, EU |
| Influence of Production and Heat Treatment on Microhardness and Phase Transformations in Mg-Y-(Nd)-Zn Alloys - POSTER |
| Co-authors STULÍKOVÁ Ivana, SMOLA Bohumil, VLACH Martin, KUDRNOVÁ Hana |
| 161. |
KIREEV Andrey |
The Vladimir State University (the VlSU), Vladimir, Russian Federation |
| Influences of Gas Content on Corrosion and Electrochemical Characteristics of Aluminum Alloys - POSTER |
| Co-authors KECHIN Vladimir |
| 162. |
KIRILLOVA Valentina |
Institute of Metallurgy and Material Science of RAS, Moscow, Russian Federation |
| The Fatigue of [100]-and [110]-Molybdenum-Rhenium Single Crystals - POSTER |
| Co-authors BURKHANOV Gennadii, SDOBYREV Vladislav, DEMENTEV Vladimir, MINAKOV Alexsandr |
| 163. |
KLAPALOVÁ Alena |
Masaryk University, Brno, Czech Republic, EU |
| Issues of Corporate Social Responsibility Web Site Communication of Metal Industry Companies |
| 164. |
KLAPUT Pavel |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Possibilities of Detection of Interactions between Parts and Appraisers in the Gage Repeatability and Reproducibility Study using Graphical Tools |
| Co-authors PLURA Jiří |
| 165. |
KLEGA René |
Pars Komponenty s.r.o., Dolní Lutyně, Czech Republic, EU |
| Improvement of Production Planning based on the Application of Principles of MRP Systems. - POSTER |
| 166. |
KLIBER Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Review of Peak Stress Setting |
| Co-authors KUNČICKÁ Lenka, MAMUZIC Ilja |
| 167. |
KLIMEŠ Lubomír |
Brno University of Technology, Brno, Czech Republic, EU |
| Parallel Dynamic Solidification Model of Continuous Steel Casting on GPU |
| Co-authors ŠTĚTINA Josef |
| 168. |
KLIMOVÁ Alena |
Institute of Materials and Machine Mechanics SAS, Bratislava, Slovakia, EU |
| Effect of the Solidification Parameters on the Distribution of the Alloying Elements during Directional Solidification of the Intermetallic Ti-44Al-5Nb-0.2B-0.2C Alloy |
| Co-authors GABALCOVÁ Zuzana, LAPIN Juraj |
| 169. |
KNOTEK Vítězslav |
ICT in Prague, Prague, Czech Republic, EU |
| Evaluation of Hydriding Parameters in Mg-Ni-Based Alloys Doped with Transition Metals |
| Co-authors VOJTĚCH Dalibor |
| 170. |
KOLAŘÍK Ladislav |
Czech Technical University in Prague, Prague, Czech Republic, EU |
| The Influence of Nickel Interlayer for Diffusion Welding of Titanium and Austenitic Stainless Steel - POSTER |
| Co-authors KOLAŘÍKOVÁ Marie, VONDROUŠ Petr, NOVÁK Pavel, SAHUL Martin |
| 171. |
KOLAŘÍK Vladimír |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Microstructuring of Metallic Layers for Sensor Applications - POSTER |
| Co-authors MATĚJKA Milan, KRÁTKÝ Stanislav, CHLUMSKÁ Jana, URBÁNEK Michal, HORÁČEK Miroslav, BOK Jan |
| 172. |
KOLAŘÍKOVÁ Marie |
Czech Technical University in Prague, Prague, Czech Republic, EU |
| The Influence of Resistance Spot Welding on Weld Joint Quality and Service Life of Electrodes - POSTER |
| Co-authors KOLAŘÍK Ladislav, VONDROUŠ Petr |
| 173. |
KOLCHUGINA Natalia |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Structural Peculiarities of Sintered (Nd,Pr,Dy,Tb)-Fe-B Magnets Prepared from TbH2-containing Powder Mixtures - POSTER |
| Co-authors LUKIN Aleksandr, BURKHANOV Gennadii, KURSA Miroslav, SKOTNICOVA Katerina, DRULIS Henrik |
| 174. |
KOLCHUGINA Natalia |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Study of Diamond-like Coating deposited on the Surface of Nd-Fe-B-Type Sintered Magnets |
| Co-authors LUKIN Aleksandr, BURKHANOV Gennadii, SPRYGIN Georgii, KURSA Miroslav, SKOTNICOVA Katerina, |
| 175. |
KOLNEROVÁ Michaela |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Application of New Types of Metal Sheet Surface Modification for Car-body Design – Quality Assessment of Bonded Joints - POSTER |
| Co-authors SOBOTKA Jiří, SOLFRONK Pavel, DOUBEK Pavel, ZUZÁNEK Lukáš |
| 176. |
KOMÍNEK Jan |
Brno University of Technology, Brno, Czech Republic, EU |
| Determination of Temperature Dependent Cooling Intensity for the Simulation of In-line Heat Treatment |
| Co-authors POHANKA Michal, ONDROUŠKOVÁ Jana |
| 177. |
KOŇAŘÍK Petr |
VSB-Technical University of Ostrava, Vendryně, Czech Republic, EU |
| New Methods of Processing Isothermally tempered Wire in Building Technology String - POSTER |
| 178. |
KONOPÍK Pavel |
COMTES FHT a.s, Dobrany, Czech Republic, EU |
| Determination of Fracture Toughness and Tensile Properties of Structural Steels by Small Punch Test and Micro-Tensile Test - POSTER |
| Co-authors DŽUGAN Jan, PROCHÁZKA Radek |
| 179. |
KONSTANCIAK Anna |
Czestochowa University of Technology, Czestochowa, Poland, EU |
| Ecological Ossibilities of Waste Utilization in Metallurgical Processes - POSTER |
| Co-authors PUSTĚJOVSKÁ Pavlina |
| 180. |
KORBÁŠ Martin |
VITKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
| Evaluation of the Results of Steel Purity Achieved in Steel Production using SSE Method |
| Co-authors ČAMEK Libor |
| 181. |
KOUBA Jan |
Brno University of Technology, Brno, Czech Republic, EU |
| Cerium based Conversion Coatings for Aluminium Alloys - POSTER |
| Co-authors ZMRZLÝ Martin, TKACZ Jakub, WASSERBAUER Jaromír |
| 182. |
KOVÁŘ Ladislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Possibility to Reduce the Consumption of Hydrocarbon Gases at Flowing Through Concentric Tuyeres - POSTER |
| 183. |
KRAJČÍK Vladimír |
Ostrava Business School, Ostrava, Czech Republic, EU |
| Improving of Processes in the Metallurgical Company Focusing on Information and Human Resources Processes |
| Co-authors CIENCIALA Jiří, TACINA Marek |
| 184. |
KRATOCHVÍL Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Monitoring the Behavior of Resistive Layers on the Inserts of Nitride Cutting Ceramics During Longitudinal Turning of Steel - POSTER |
| Co-authors PETŘKOVSKÁ Lenka |
| 185. |
KRAUS Martin |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Degradation of Heat Resistant Steels Components of Power Plant - POSTER |
| Co-authors BYSTRIANSKÝ Jaroslav, MAREŠ Vratislav |
| 186. |
KRAWCZYK Janusz |
AGH University of Science and Technology, Cracow, Poland, EU |
| The Influence of Chemical Composition and Microstructure on Wear Mechanism of Equipment Rolls for Fine Section Mills - POSTER |
| Co-authors PAWLOWSKI Bogdan, BALA Piotr |
| 187. |
KRČEK Břetislav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| A Contribution to the Optimization of the Blast Furnace Material Balance Calculation - POSTER |
| 188. |
KREISLOVÁ Kateřina |
SVÚOM s.r.o., Prague, Czech Republic, EU |
| Contemporary Condition of Corrosion Attack of Metallurgical Products and its Evaluation - INVITED LECTURE |
| 189. |
KREJČÍ Lucie |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Transition Zones Study of the Heterogenous Welded Joints - POSTER |
| Co-authors HLAVATÝ Ivo |
| 190. |
KRIVTSOVA Olga |
Karaganda state industrial university, Temirtau, Kazakhstan |
| Comparative Evaluation of Technologic Lubricants |
| Co-authors NAIZABEKOV Abdrakhman , SAMSONOV Dmitriy,LEZHNEV Sergey, TALMAZAN Vitaliy, ARBUZ Aleksandr |
| 191. |
KUBÁSEK Jiří |
ICT in Prague, Prague, Czech Republic, EU |
| Influence of Mechanical and Thermal Treatment on Mechanical and Biodegradation Properties of Magnesium Alloys |
| Co-authors VOJTĚCH Dalibor |
| 192. |
KUBINA Tomáš |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Plotting of Processing Maps of P91 Steel and Ms70 Brass with Energy Dissipation and Instability Parameter Computation on the basis of Plastometric Tests - POSTER |
| Co-authors KUNČICKÁ Lenka, KLIBER jiří |
| 193. |
KUČERA Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Effect of Final Surface Treatment of 34CrMo4 Steel on Resistance to Sulphide Stress Cracking (SSC) |
| 194. |
KUČEROVÁ Ludmila |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| New Development in Thermo-Mechanical Processing of TRIP Steels |
| Co-authors JIRKOVÁ Hana, PRŮCHA Vojtěch, PILEČEK Vít, MAŠEK Bohuslav |
| 195. |
KUNČICKÁ Lenka |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| FEM Simulations and Comparison of the ECAP and ECAP-PBP Influence on Material’s Deformation Behaviour |
| Co-authors KOCICH R., ANDREYACHSHENKO V. A., DRÁPALA J. |
| 196. |
KURKA Vladislav |
Material and Metallurgical Reseach Ltd., Ostrava, Czech Republic, EU |
| Effect of Selenium on Metallographic Purity and Formability |
| Co-authors PINDOR Jaroslav, HUDZIECZEK Zbyněk, ADOLF Zdeněk, CIENCIALA Jiří |
| 197. |
KUSMIČ David |
University of Defence, Brno, Czech Republic, EU |
| Corrosion Resistance of Plasma Nitrided Structural Steels |
| Co-authors HRUBÝ Vojtěch |
| 198. |
KUŻDOWICZ Paweł |
University of Zielona Góra, Zielona Gora, Poland, EU |
| Allocation of Internal Activity Costs in Production Enterprises |
| 199. |
KVÍČALA Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Different Heating Strategies on Stress-Strain Behaviour of Continuously Cast Bloom with and without Internal Defect |
| Co-authors FRYDRÝŠEK Karel, HENDRYCH Aleš |
| 200. |
KWIATKOWSKI Michal |
AGH University of Science of Technology, Kraków, Poland, EU |
| Computer Simulation of Trimming Process for High Volume Press Production |
| Co-authors NOWOSIELSKI Maciej, Krzysztof ZABA |
| 201. |
KYNCL Nicole |
VSB-Technical University of Ostrava, Turnov, Czech Republic, EU |
| Identification of Bottlenecks in Ironfoundry Production – Case Study - POSTER |
| 202. |
LAKOMÁ Renáta |
CIREX s.r.o., Kopřivnice, Czech Republic, EU |
| Possibilities for Quality Control of Casting Products |
| Co-authors ČAMEK Libor |
| 203. |
LAMPA Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Innovative Access for Solution of "Two-dimensional" Cutting Problem in Metallurgical Operation - POSTER |
| Co-authors SAMOLEJOVÁ Andrea, SIKOROVÁ Andrea, JANOVSKÁ Kamila, BESTA Petr |
| 204. |
LAPIN Juraj |
Institute of Materials and Machine Mechanics SAS, Bratislava, Slovakia, EU |
| The Effect of Microstructure on Mechanical Properties of Single Crystal CMSX 4 Superalloy |
| Co-authors PELACHOVÁ Tatiana, BAJANA Oto |
| 205. |
LASEK Stanislav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Corrosion Behaviour of Selected High Manganese Austenitic Steels |
| Co-authors MAZANCOVÁ Eva |
| 206. |
LASEK Stanislav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Properties of Ni/Cu/Ni and Ni Coatings for Corrosion Protection of NdFeB Base Magnets |
| Co-authors DOBROVODSKÁ Nela, SKOTNICOVÁ Kateřina |
| 207. |
LEIDOLF Marek |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Analysis of Maintenance Data in Terms of Possible Application of Statistical Process Control - POSTER |
| Co-authors NOSKIEVIČOVÁ Darja |
| 208. |
LENORT Radim |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Concept of a System for Resilience Measurement in Industrial Supply Chain - POSTER |
| Co-authors WICHER Pavel |
| 209. |
LENORT Radim |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| The Service Life Calculation of Crane Ropes in Metallurgical Operations - POSTER |
| Co-authors ŠADEROVÁ Janka |
| 210. |
LEZHNEV Sergey |
Karaganda State Industrial University, Temirtau, Kazakhstan |
| Analysis of the Microstructure Evolution of Copper at Equal Channel Angular Pressing |
| Co-authors VOLOKITINA Irina, NAIZABEKOV Abdrakhman, CHALAYA Oksana |
| 211. |
LEZHNEVA Victoria |
Karaganda State Industrial University, Temirtau, Kazakhstan |
| Aspects of Ferrous Metallurgy Development in Kazakhstan at the Example of Arcelormittal Temirtau JSC |
| Co-authors LEZHNEV Sergey |
| 212. |
LICHÝ Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Thermophysical Properties and Microstructure of Selectected Magnesium Alloys |
| Co-authors BEŇO Jaroslav, CAGALA Michal, |
| 213. |
LOSERTOVÁ Monika |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Effect of Nb on the Phase Transformation in Biocompatible TiNb-based Alloys - POSTER |
| 214. |
LOŠŤÁKOVÁ Hana |
University of Pardubice, Pardubice, Czech Republic, EU |
| The Key Strategic Customer Benefits Leading to Strengthening Relations with Customers in the Chemical Industry - POSTER |
| Co-authors HAVRÁNEK Aleš |
| 215. |
ŁUKASZEK-SOŁEK Aneta |
AGH University of Science and Technology, Cracow, Poland, EU |
| The Analysis of Forging of Inconel 718 alloy - POSTER |
| Co-authors J. KRAWCZYK, M. WOJTASZEK |
| 216. |
MADAJ Michal |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Modeling Ternary Alloy Systems using Matlab Software - POSTER |
| Co-authors MORÁVKOVÁ Zuzana, VRBICKÝ Jiří, DRÁPALA Jaromír |
| 217. |
MACHOVČÁK Pavel |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
| The Development of Hollow Ingot Casting Technology at VÍTKOVICE HEAVY MACHINERY a.s. |
| Co-authors OPLER Aleš, CARBOL Zdeněk, KORBÁŠ Martin, KOVÁČ Marek, KRUTIŠ Vladimír |
| 218. |
MALCZYK Piotr |
Technical University of Dresden, Dresden, Germany, EU |
| Influence of Stress Decay Heat Treatment on the Improvement of Mechanical Properties of Aluminium based Metal Matrix Composites |
| Co-authors HUFENBACH Werner, GUDE Maik, CZULAK Andrzej, PRZYBYSZEWSKI Bartlomiej, KOWALSKA Agata |
| 219. |
MÁLEK Jaroslav |
UJP PRAHA a.s., Prague, Czech Republic, EU |
| The Influence of Zr on Microstructure of Beta-Titanium Alloys |
| Co-authors HNILICA František, VESELÝ Jaroslav |
| 220. |
MALCHARCZIKOVÁ Jitka |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Structural and Fracture Characteristics of Nickel-based Alloys - POSTER |
| Co-authors MICHENKA Vít, POHLUDKA Martin, KAŇÁK David, FRIDRICH René |
| 221. |
MALINDŽÁK Dušan |
Technical University in Kosice, Košice, Slovakia, EU |
| The Production Capacity Planing Model in Term of SCM |
| Co-authors KAČMARY Peter |
| 222. |
MANDZIEJ Stan |
Advanced Materials Analysis, Enschede, Netherlands, EU |
| Severe Plastic Deformation of Al Alloys |
| 223. |
MANDZIEJ Stan |
Advanced Materials Analysis, Enschede, Netherlands, EU |
| Accelerated Creep Test for Repair Welds in Thermal Power Generation |
| 224. |
MAREK Ivo |
Institute of Chemical Technology in Prague, Prague, Czech Republic, EU |
| Study on Nanocrystalline Bulk Copper Prepared by Selective Dissolving |
| Co-authors VOJTĚCH Dalibor, MICHALCOVÁ Alena, KNOTEK Vítězslav |
| 225. |
MAREŠOVÁ Martina |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Tensile Testing at High Strain Rates using DIC Method - POSTER |
| Co-authors KONOPÍK Pavel |
| 226. |
MAROUŠEK Roman |
ŠKODA Auto University, Mladá Boleslav, Czech Republic, EU |
| Application of Quality House in Industrial Supply Chain Resilience Assessment |
| 227. |
MASARIK Miloš |
EVRAZ VÍTKOVICE STEEL, a.s., Ostrava, Czech Republic, EU |
| Checking the System of Quality Prediction in Concast Equipment when Producing Microlloyed Steels. |
| Co-authors ČAMEK Libor |
| 228. |
MAŠLEJOVÁ Alica |
U.S.Steel Kosice Ltd., Košice, Slovakia, EU |
| Utilization of Biomass in Ironmaking |
| 229. |
MATĚÁSKO Jan |
MIKRO, spol. s r.o., Brno, Czech Republic, EU |
| Automated Digital 3D Topography Measurement The Leica DCM 3D Dual Core Measuring Microscope - COMMERCIAL PRESENTATION |
| 230. |
MAUDER Tomáš |
Brno University of Technology, Brno, Czech Republic, EU |
| On-line Fuzzy Regulator for Continuous Casting Process |
| Co-authors ŠTĚTINA Josef, MASARIK Miloš |
| 231. |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Plasticity of Steel X50MnAl27-7 with Addition of Ni and Cu |
| Co-authors CAGALA M., SMETANA B., ŽALUDOVÁ M. |
| 232. |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Hardness of Different High Manganese Steels Types in Relation to Processing |
| Co-authors CAGALA M., SCHINDLER I. |
| 233. |
MENUSHENKOV V.P. |
National University of Science and Technology "MISIS", Ostrava, Czech Republic, EU |
| Effects of Addition and Heat Treament on the Microstructure and Magnetic Properties of Sintered Nd-Fe-B Magnets |
| Co-authors A.G. SAVCHENKO, Kateřina SKOTNICOVÁ, Miroslav KURSA |
| 234. |
MENUSHENKOV Vladimir |
National University of Science and Technology "MISIS", Ostrava, Czech Republic, EU |
| Structure and Magnetic Properties of SrFe12O19 Hexaferrite Prepared from Submicron-sized Powders - POSTER |
| Co-authors SHUBAKOV Vladimir, KUDASOV Dmitrij |
| 235. |
MENUSHENKOV Vladimir |
National University of Science and Technology "MISIS", Ostrava, Czech Republic, EU |
| Effect of High-pressure Torsion on Structure and Magnetic Properties of As-cast Nd9.5Fe84.5B6 Alloy - POSTER |
| Co-authors POLIKUTKINA Svetlana, SKORODUMOV Sergej, ZEHETBAUER M. , HORKY J. |
| 236. |
MESSAOUDI Salim |
University de Biskra, Biskra, Algeria |
| Evolution of Texture and Mechanical and Electrical Properties in the Copper Wires: Drawn and Annealed - POSTER |
| Co-authors ZIDANI Mosbah, BAUDIN Thierry, DERFOUF Chems Eddine and BOULAGROUN Abdelmalek |
| 237. |
MICHALCOVÁ Alena |
Institute of Chemical Technology Prague, Prague, Czech Republic, EU |
| Analytical Methods Suitable for Rapidly Solidified Alloys |
| Co-authors NOVÁK Pavel, VOJTĚCH Dalibor, ČÍŽEK Jakub, MAREK Ivo, VODĚROVÁ Milena |
| 238. |
MICHLOWICZ Edward |
AGH University of Science and Technology, Cracow, Poland, EU |
| TPM Method in the Analysis of Flow in the Cold Rolling Mill |
| 239. |
MIŁEK Tomasz |
Kielce University of Technology, Kielce, Poland, EU |
| Computer Analysis of Forming of Round Forged Parts in Mechanical Press and Hammer |
| 240. |
MINÁRIK Peter |
Charles University in Prague, Prague, Czech Republic, EU |
| Evolution of the microstructure, mechanical properties and corrosion resistance of AE21 magnesium alloy after ECAP - POSTER |
| Co-authors KRÁL Robert, JANEČEK Miloš |
| 241. |
MIŠTEROVÁ Hedvika |
University of West Bohemia, Pilsen, Czech Republic, EU |
| Mini-Thixoforming of Tool Steel X210Cr12 |
| Co-authors Andrea RONEŠOVÁ, Štěpán JENÍČEK |
| 242. |
MOHYLA Petr |
Flash Steel Power, a.s., Ostrava, Czech Republic, EU |
| Investigation of Mechanical Properties of P92 welded Joints Made by MMAW |
| Co-authors FOLDYNOVÁ Kristýna, ZAPLETALOVÁ Andrea |
| 243. |
MOLA Renata |
Kielce University of Technology, Kielce, Poland, EU |
| Formation of an Mg-Al-Zn Intermetallic Surface Layer on Magnesium |
| Co-authors DEPCZYŃSKI Wojciech |
| 244. |
MOLNÁROVÁ Orsolya |
Charles University in Prague, Prague, Czech Republic, EU |
| Plastic Instabilities in AlMg4.5Mn Alloy Sheet - POSTER |
| Co-authors DOBROŇ Patrik, CHMELÍK František |
| 245. |
MORAVEC Jaromír |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Grain Size Prediction of Steel P92 by Help of Numerical Simulations |
| Co-authors BRADÁČ Josef, NEUMANN Heinz, NOVÁKOVÁ Iva |
| 246. |
MRŇA Libor |
Institute of Scientific Instruments AS CR, v.v.i., Brno, Czech Republic, EU |
| Laser Welding of DOMEX Steel and Heterogeneous Weld with DC01 |
| Co-authors KOPECKÝ Lukáš, NĚMEČEK Lukáš, MIKMEKOVÁ Šárka |
| 247. |
MUŠÁLEK Radek |
Institute of Plasma Physics AV CR, v.v.i., Prague, Czech Republic, EU |
| Preparation of Multiphase Materials with Spark Plasma Sintering |
| Co-authors DLABÁČEK Zdeněk, CINERT Jakub, KOTLAN Jiří, VILÉMOVÁ Monika, NEVRLÁ Barbara, PALA Zdenek, MATĚJÍČEK Jiří, CHRÁSKA Tomáš |
| 248. |
NAIZABEKOV Abdrakhman |
Karaganda state industrial university, Temirtau, Kazakhstan |
| Analysis of Surface Defects of “Dent” and “Pin-Hole” Types Formation Process during Cold Rolling |
| Co-authors TALMAZAN Vitaliy, YERZHANOV Almas |
| 249. |
NĚMEČEK Stanislav |
MATEX PM Ltd., Pilsen, Czech Republic, EU |
| Laser Welding of Thick Plates |
| Co-authors MUŽÍK Tomáš, MÍŠEK Michal, ŠTĚPÁN Karel |
| 250. |
NĚMEČEK Stanislav |
MATEX PM Ltd., Pilsen, Czech Republic, EU |
| Laser Direct Metal Deposition |
| Co-authors MUŽÍK Tomáš, MÍŠEKl Michal, ŠTĚPÁN Karel |
| 251. |
NOSKIEVIČOVÁ Darja |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Complex Application of Statistical Process Control in Conditions of Profile Bars Production |
| Co-authors JAROŠOVÁ Eva |
| 252. |
NOVÁK Pavel |
ICT in Prague, Prague, Czech Republic, EU |
| Powder Metallurgy Preparation of Porous Titanium for Medical Implants |
| Co-authors SITA Ladislav, KNAISLOVÁ Anna, VOJTĚCH Dalibor |
| 253. |
NOVÁK Pavel |
ICT in Prague, Prague, Czech Republic, EU |
| Formation and Thermal Stability of Intermetallics in Al-Cu-Fe Alloys - POSTER |
| Co-authors VODĚROVÁ Milena, MEJZLÍKOVÁ Lucie, MICHALCOVÁ Alena, VOJTĚCH Dalibor |
| 254. |
NOVOTNY Petr |
ŠKODA AUTO a.s., Mladá Boleslav, Czech Republic, EU |
| Deep Dive into Smart Supply Chain Efficiency - POSTER |
| Co-authors FOLTA Martin |
| 255. |
NOWAK Jan |
BOSMAL Automotive Research and Development Institute Ltd., Bielsko-Biała, Poland, EU |
| Influence of Alloy Elements on Corrosion Resistance of Valve Steels in Environment of Combustion Gases of Petrol Fuel with 5, 10 and 50 % of Ethanol Additives - POSTER |
| Co-authors ADAMASZEK Krzysztof |
| 256. |
NOWAK Jarosław |
AGH University of Science and Technology, Kraków, Poland, EU |
| Verification of Flow Stress Model in Multi-Stages Deformation Process |
| Co-authors SVYETLICHNYY Dmytro S., PIDVYSOTS’KYY Valeriy |
| 257. |
NOWOSIELSKI Maciej |
AGH University of Science and Technology, Cracow, Poland, EU |
| Compensation of Springback Effect in Designing New Pressing Technologies |
| Co-authors ZABA Krzysztof, KWIATKOWSKI Michal, KITA Pawel |
| 258. |
NUNTAWAT Chokchaithananan |
Sahaviriya Steel Industry, Prachuabkirikhan, Thailand |
| Development in Production of High Formability Boron added Low Carbon Steel |
| Co-authors TAKATERU Umeda |
| 259. |
OANCA Octavian |
Polytechnic University of Timisoara, Timisoara, Romania, EU |
| Phenomenology of Degradation by Cavitation for Heat Treated Cu-Al-Ni-Fe Bronzes - POSTER |
| Co-authors BORDEASU Ilare, MITELEA Ion, CRACIUNESCU Corneliu |
| 260. |
OMRANIAN Mohammadi Peiman |
FZA company, Amol, Iran, Islamic Republic of |
| Use of Silicon Carbide as an Inoculant in Ductile Iron Casting to Reduce the Cost with Keeping on Properties - POSTER |
| Co-authors MOHAMMADPOUR Ghasem, KHALILPOUR Meghdad, SHAKERI Nima, ALAVI Nabi |
| 261. |
OMRANIAN Mohammadi Peiman |
FZA company, Amol, Iran, Islamic Republic of |
| Using the Sponge Iron for Casting of Ductile Iron with Reducing the Cost |
| Co-authors SHAKERI nima, MOHAMMADPOUR ghasem, KHALILPOUR meghdad, ARDESHIR mahmoud, NAEIMI taghi |
| 262. |
OPIELA Marek |
Silesian University of Technology, Gliwice, Poland, EU |
| Thermo-Mechanical Treatment of Forged Products of Ti-V-B Microalloyed Steel - POSTER |
| Co-authors GRZEGORCZYK Barbara |
| 263. |
OSTROUSHKO Dmytro |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Phase Interface Analysis and Close Vicinity of 304 SS Explosively Cladded with Titanium |
| Co-authors MAZANCOVÁ Eva, SAKSL Karel |
| 264. |
OZSARAC Ugur |
Sakarya University, Sakarya, Turkey |
| Effect of Carbon and Silicon Addition on Mechanical Properties and Microstructure in Nodular Cast Iron - POSTER |
| Co-authors EKICI Mehmet, ASLANLAR Salim, VAROL Faruk |
| 265. |
PACURAR Ana Talida |
Politehnica University of Timişoara, Timisoara, Romania, EU |
| A study regarding the comparation between photovoltaic cells - POSTER |
| Co-authors TOADER Dumitru, PACURAR Cristian |
| 266. |
PACURAR Cristian |
Politehnica University of Timişoara, Timisoara, Romania, EU |
| Photovoltaic Panels - Application of Nanomaterials - POSTER |
| Co-authors PACURAR Ana Talida, Dumitru TOADER |
| 267. |
PANFILOV Alexey |
Vladimir State University, Vladimir, Russian Federation |
| Current State and Trends of Development of Aluminum Matrix Composite Alloys |
| Co-authors PRUSOV Evgeny |
| 268. |
PARILÁK Ľudovít |
ŽP VVC Ltd., Podbrezová, Slovakia, EU |
| Optimization of the Tube Rolling Process for 25CRMO4 Steel Grade - POSTER |
| Co-authors MOJŽIŠ Milan, KVAČKAJ Tomáš, DOMOVCOVÁ Lucia |
| 269. |
PARK Jaihyun |
RIST, Pohang, Korea, Republic of |
| Comparison of Creep Properties and Failure Analysis for Heat Resistance Cast Steels - POSTER |
| 270. |
PARKER Jonathan |
EPRI, Charlotte, United States |
| Weld Repair of Grade 91 Steel |
| Co-authors SIEFERT John |
| 271. |
PASCA Niculai |
ISIM Timisoara, Timisoara, Romania, EU |
| Extended the Remaining Life for Two Pipes in Creep Condition - POSTER |
| Co-authors MURARIU Alin Constantin, DUMA Iuliana |
| 272. |
PECINOVÁ Zuzana |
University of Pardubice, Pardubice, Czech Republic, EU |
| Barriers to the Development of Cooperation in Value Networks with a Low Level of Cooperation - POSTER |
| Co-authors LOŠŤÁKOVÁ Hana, BRANSKÁ Lenka |
| 273. |
PELLE Marius |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Investigations regardings the Cavitation Erosion of Nodular Cast Iron with Ferrite - Pearlite Microstructure |
| Co-authors MITELEA Ion, BORDEASU Ilare, CRĂCIUNESCU Corneliu |
| 274. |
PENCHEV todor |
Technical University of Sofia, Sofia, Bulgaria, EU |
| Experimental Investigations of “Controlled Impact” Effect - POSTER |
| Co-authors ALTAPARMAKOV Ivan |
| 275. |
PERIANU Ion Aurel |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Researches Regarding the Effect of Pressure on Surface Quality during Abrasive Waterjet Cutting of Austenitic Steels |
| Co-authors MITELEA Ion, SERBAN Viorel Aurel |
| 276. |
PETRENEC Martin |
Tescan, a.s., Brno, Czech Republic, EU |
| Elastic-plastic Behaviour of Advanced ADI Studied by In-situ SEM Tensile Test |
| Co-authors TESAŘOVÁ Hana, KRAHULA Karel, POLÁK Jaroslav |
| 277. |
PIETRZYK Maciej |
AGH University of Science and Technology, Krakow, Poland, EU |
| Analysis of Theoretical Methods of Evaluation of Bainitic Hardenability of Steels |
| Co-authors KUZIAK Roman |
| 278. |
PILEČEK Vít |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| Optimization of Low-temperature Thermo-mechanical Treatment on 54SiCr Steel for Spheroidisation Carbides |
| Co-authors JIRKOVÁ Hana, KUČEROVÁ Ludmila, MAŠEK Bohuslav |
| 279. |
PLURA Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Approaches to the Process Capability Analysis in the Case of Not Normally Distributed Product Quality Characteristic |
| Co-authors ZEMEK Milan, KLAPUT Pavel |
| 280. |
PODJUKLOVÁ Jitka |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Study of Influence Corrosive Environment on Characteristics Protective Coatings used for Long-term Corrosion Protection of Steel Substrate |
| Co-authors SUCHÁNKOVÁ Kateřina, ŠRUBAŘ Petr, KOPAŇAKOVÁ Sylvie, HRABOVSKÁ Kamila |
| 281. |
POHLUDKA Martin |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Structure and Mechanical Properties of Nickel Alloys - POSTER |
| Co-authors MALCHARCZIKOVÁ Jitka, MICHENKA Vít, KURSA Miroslav, ČEGAN Tomáš, SZURMAN Ivo |
| 282. |
POKOVÁ Michaela |
Charles University in Prague, Prague, Czech Republic, EU |
| Twin-roll Cast Aluminium Alloys Processed by ECAP |
| Co-authors CIESLAR Miroslav, MÁLEK Přemysl |
| 283. |
POLÁKOVÁ Ivana |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Flow Stress Determination Methods for Numerical Modelling |
| Co-authors KUBINA Tomáš |
| 284. |
POLAT Gökhan |
Yildiz Technical University, Istanbul, Turkey |
| Using of Waste Pet (Polyethylene Terephthalate) As an Alternative Reductant in Iron and Steel Industry - POSTER |
| Co-authors BİROL Burak, SARIDEDE Muhlis Nezihi |
| 285. |
POMIKÁLEK Lukáš |
VÍTKOVICE POWER ENGINEERING a.s., Ostrava, Czech Republic, EU |
| The Effect of Welding on the Properties of Steels HR3C, Super 304H, Tp347HFG and P92 - POSTER |
| Co-authors HERMANOVÁ Šárka, DOBROVODSKÁ Lenka |
| 286. |
POMYKALSKI Przemysław |
Lodz University of Technology, Lodz, Poland, EU |
| Changing Financial Ratios of Basic Metals Manufacturing Companies in Poland |
| 287. |
POP-CALIMANU Marius |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Optimization of Ultrasonic Welding Parameters and Temperature Distribution in Metal Matrix Composite based on Aluminium |
| Co-authors POP-CALIMANU Ioana, GUBENCU Dinu, FLESER Traian |
| 288. |
POPELA Tomáš |
ICT in Prague, Prague, Czech Republic, EU |
| Preparation and Properties of Boride Layers ON TiAl Intermetallics |
| Co-authors VOJTĚCH Dalibor |
| 289. |
POPESCU Mihaela |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Joining of Metallic Composite Materials by CMT Pulse - POSTER |
| Co-authors ROSU Radu Alexandru, LOCOVEI Cosmin, PERIANU Ion Aurel |
| 290. |
POSPÍŠILOVÁ Iva |
Institute of Chemical Technology Prague, Prague, Czech Republic, EU |
| Mechanical Properties of Zn- Mg Alloys - POSTER |
| Co-authors VOJTĚCH Dalibor |
| 291. |
PROVOTOROV Dmitrij |
NPP “Vulkan-TM” / Tula State University, Tula, Russian Federation |
| State-of-the-Art Out-of-Furnace Steel Making and Steel Casting Solutions by SME Vulkan-TM |
| Co-authors V.I. Zolotukhin, V.V. Preys, I.A. Ilyichev, K.V. Zvyagin |
| 292. |
PRUSOV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
| Influence of Repeated Remeltings on Formation of Structure of Castings from Aluminum Matrix Composite Alloys |
| Co-authors PANFILOV Alexey |
| 293. |
PRŮŠA Filip |
ICT in Prague, Prague, Czech Republic, EU |
| Mechanical Properties and Thermal Stability of AlSi-X Based Alloys Prepared by Centrifugal Atomization |
| Co-authors VOJTĚCH Dalibor |
| 294. |
PRZYBYSZEWSKI Bartlomiej |
Technical University of Dresden, Dresden, Germany, EU |
| The Investigation of Mechanical Properties of Aluminium based Metal Matrix Composites at Elevated Temperatures |
| Co-authors HUFENBACH Werner, GUDE Maik, CZULAK Andrzej, MALCZYK Piotr |
| 295. |
PUCHNIN Maxim |
Czech Technical University in Prague, Prague, Czech Republic, EU |
| Investigation of DLC Coating and its Influence on the Mechanical Properties of Ti and its Alloy Ti 6Al 4V by Means of Automated Ball Indentation Test |
| Co-authors ANISIMOV Evgeny |
| 296. |
PUSTĚJOVSKÁ Pavlína |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Possibilities of Energetic and Economic Utilization of Waste Mine Gas - POSTER |
| Co-authors BROŽOVÁ Silvie, KARDAS Edyta |
| 297. |
RAPOUCH Jiří |
ICT in Prague, Prague, Czech Republic, EU |
| Structure and Electrochemical Behaviour of Fe-9Cr-W Alloys with Variable Carbon and Tungsten Content - POSTER |
| Co-authors BYSTRIANSKÝ Jaroslav |
| 298. |
REDA Ahmed |
Zagazig University, Zagazig, Egypt |
| Neutron and Gamma Ray Shielding Properties of Modified Ni-Ti X Mo Maraging Steels - POSTER |
| Co-authors HALFA Hossam |
| 299. |
REINECKE Steffen |
ThyssenKrupp Presta Chemnitz GmbH, Chemnitz, Germany, EU |
| Supply Chain Deviations Management |
| Co-authors LENORT Radim |
| 300. |
RÍZEKOVÁ TRNKOVÁ Lýdia |
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU |
| Influence of the Chemical Composition on the selected Properties of Lead-free Solders |
| Co-authors DRIENOVSKÝ Marián, LOKAJ Ján, OŽVOLD Milan |
| 301. |
ROŞU Radu Alexandru |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Depositoin of Alumina Ceramic Biocompatible Layers by Plasma Spraying |
| Co-authors POPESCU Mihaela, ŞERBAN Viorel-Aurel, PERIANU Ion Aurel |
| 302. |
ROSYPALOVÁ Silvie |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Modeling Viscosity and Surface Tension of CaO - Al2O3 - SiO2 System |
| Co-authors ŘEHÁČKOVÁ Lenka, DUDEK Rostislav, DOBROVSKÁ Jana, DOBROVSKÝ L'udovít, ŽALUDOVÁ Monika |
| 303. |
RUSZ Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Deformation Behaviour of Surface Layers of Continuously Cast Blanks from C-Mn-Cr Steels |
| Co-authors SCHINDLER Ivo, SOJKA Jaroslav, KAWULOK Rostislav, KAWULOK Petr, TUROŇOVÁ Petra, TUROŇ Rostislav |
| 304. |
RUSZ Stanislav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Influence of Severe Plastic Deformation on Mechanical Properties of Low Carbon Steel |
| Co-authors RUSZ Stanislav, ČÍŽEK Lubomír, DONIČ Tibor, SALAJKA Michal, TYLŠAR Stanislav, J. KEDROŇ Jan, MICHENKA Vít |
| 305. |
SALINA Valentina |
Karaganda State Industrial University, Temirtau, Kazakhstan |
| Technology of Obtaining New Complex Ferroalloys on the Basis of Manganese for Secondary Refining Steel - POSTER |
| Co-authors BAISANOV Saylau, RYABCHIKOV Ivan, ALEKSEENKO Aleksandr, REZNITSKY Ilya |
| 306. |
SAMOLEJOVÁ Andrea |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Myths and Questions of Managers about Motivation for Employee Creativeness - POSTER |
| Co-authors LAMPA Martin, SIKOROVA Andrea |
| 307. |
SANIUK Anna |
University of Zielona Gora, Zielona Gora, Poland, EU |
| Performance Management in Metalworking Processes as a Source of Sustainable Development - POSTER |
| Co-authors CAGÁŇOVÁ Dagmar, ČAMBÁL Miloš |
| 308. |
SANIUK Sebastian |
University of Zielona Góra, Zielona Góra, Poland, EU |
| System of Production Flow Planning in Metalworking Clusters - POSTER |
| 309. |
SAVKOVÁ Jarmila |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| Microstructure of TiAlSiN Coatings Prepared by Cathodic arc PVD - POSTER |
| Co-authors BLAHOVA Olga |
| 310. |
SAVKOVÁ Jarmila |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| Effect of Forging on Microstructure of Fe-B Cast Steel - POSTER |
| Co-authors CHOTEBORSKÝ Rostislav, BLÁHOVÁ Olga |
| 311. |
SEBZDA Wojciech |
Silesian University of Technology, Gliwice, Poland, EU |
| Technological Parameters Influence on Continuous Cast Grey Iron |
| Co-authors SZAJNAR Jan |
| 312. |
SEN Saduman |
Sakarya University, Sakarya, Turkey |
| Structural Characterization of Molybdenum Silicides Deposited on Molybdenum by Pack Method - POSTER |
| Co-authors OZDEMİR Ozkan, YILMAZ Şenol, SEN Ugur |
| 313. |
SEN Ugur |
Sakarya University, Sakarya, Turkey |
| Kinetics of Iron Silicide deposited on AISI D2 Steel by Pack Method |
| Co-authors OZDEMIR Ozkan, YILMAZ Şenol, ŞEN Şaduman |
| 314. |
SCHINDLER Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Static Recrystallization of Intermetallic Compound of the Type Fe-40at.%Al-Zr-B - POSTER |
| Co-authors SCHINDLER Ivo, RUSZ Stanislav, HANUS Pavel, KOPEČEK Jaromír |
| 315. |
SCHMIDOVA Eva |
Univerzity of Pardubice, Pardubice, Czech Republic, EU |
| Parameters of Advanced High Strength Steels Weldability - POSTER |
| Co-authors KONEČNÝ Michal |
| 316. |
SCHUBERT Jan |
Výzkumný a zkušební ústav Plzeň s.r.o., Pilsen, Czech Republic, EU |
| Effect of Spray Parameters on the Properties of HVOF Sprayed Coatings with Changing Co Content Based on Tungsten Carbide - POSTER |
| Co-authors HOUDKOVÁ Šárka, ČESÁNEK Zdeněk, KAŠPAROVÁ Michaela |
| 317. |
SCHWARZ Zdeněk |
ComTax Advising s.r.o., Fryčovice, Czech Republic, EU |
| The Issues Relating to Valuation of Long-Term Tangible Fixed Assets in Accounting of Industrial Enterprise |
| Co-authors BUCHTOVÁ Jana, BERANOVÁ Petra |
| 318. |
SIDOROV Evgeny |
Vladimir State university, Vladimir, Russian Federation |
| Peculiarities of Obtaining Castings of Alloys with Stoichiometric Compositions with Peritectic Transformations |
| Co-authors PIKUNOV M.V., DRÁPALA J. |
| 319. |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
| On the Dependence of the Structures of the Solid Solution Alloy Castings on the Crystallization Character Indices - POSTER |
| Co-authors DRÁPALA Jaromír, PIKUNOV Mikhail |
| 320. |
SIKOROVÁ Andrea |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Marketing Innovations in Industrial Firms - POSTER |
| Co-authors SAMOLEJOVA Andrea, LAMPA Martin |
| 321. |
SÎRBU Nicușor Alin |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Failure Analysis of the Titanium Alloy Horn used in Ultrasonic Processing of Polymeric Materials in the Automotive Industry - POSTER |
| Co-authors ȘERBAN Viorel-Aurel, OANCĂ Octavian, ȘERBAN Șerban-Iancu |
| 322. |
SKOTNICOVÁ Kateřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Effect of Thermal Stabilization on the Composition, Microstructure and Magnetic Properties of Nd-Fe-B Sintered Magnets |
| Co-authors ČEGAN Tomáš, KURSA Miroslav, LESŇÁK Michal & KONEČNÁ Kateřina |
| 323. |
SKRBEK Břetislav |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Magnetic Spot in Structuroscopy Industrial Steels Application - POSTER |
| 324. |
ŚLEBODA Tomasz |
AGH University of Science and Technology, Cracow, Poland, EU |
| Isothermal Forging of P/M FeAl Alloys - POSTER |
| Co-authors ŁUKASZEK-SOŁEK Aneta, BEDNAREK Sylwia |
| 325. |
SMETANA Bedřich |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of Latent Heats of Fe Based Metallic Alloys |
| Co-authors ŽALUDOVÁ Monika, ZLÁ Simona, DOBROVSKÁ Jana, KREJČÍ Lucie |
| 326. |
SMIRNOV Yevgeny |
Donetsk nation technical university, Donetsk, Ukraine |
| Modeling of Melt Flow and Solidification in the Twin-Roll Strip Casting Process |
| Co-authors SMIRNOV A., KRAVCHENKO O., PODOBNYI S., KRAVCHENKO А., SMYRNOV O. |
| 327. |
SOBOTKA Jiří |
Technical University of Liberec, MECAS ESI s.r.o., Liberec, Czech Republic, EU |
| Utilization of Contact-less Optical System for the Bore Expansion Test - POSTER |
| Co-authors SOLFRONK Pavel, KOLNEROVÁ Michaela, NOVÝ Jan |
| 328. |
SOBOTKA Jiří |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Hydraulic Bulge Test and its Utilization for Vegter Yield Criterion - POSTER |
| Co-authors SOLFRONK Pavel, ZUZÁNEK Lukáš, NOVÝ Jan |
| 329. |
SOBOTOVÁ Jana |
Czech Technical University in Prague, Prague, Czech Republic, EU |
| Structure and Properties of Sub-zero Processed Ledeburitic Tool Steels |
| Co-authors CEJP Jiří, JURČI Petr, SALABOVÁ Petra, PRIKNER Otakar |
| 330. |
SOCHA Ladislav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Evaluation of Influence of Fluxing Agents based on Al2O3 on Slag Mode and Process of Steel Desulphurization in EAF |
| Co-authors BAŽAN Jiří, STYRNAL Petr, ČÁP Dalibor, HAÁSZ Gabriel, CHAMRÁD Vladimír, JANISZEWSKI Krystian |
| 331. |
SOJKA Jaroslav |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Diffusion Characteristics of Hydrogen in the TRIP 800 C-Mn-Si-P Steel |
| Co-authors ŠTĚPÁN Petr, VÁŇOVÁ Petra |
| 332. |
SOLOMONOV Konstantin |
Karaganda State Industrial University, Temirtau, Kazakhstan |
| Modeling of Metal Yielding during Processes of Forging and Stamping |
| Co-authors LEZHNEV Sergey |
| 333. |
SPÁČIL Vojtěch |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Preference of Information Sources on the Market of Stainless Steel Products |
| 334. |
SRIHAKULUNG Ornin |
Defence Technology Institute, Bangkok, Thailand |
| The Static Test Material Optimization for Solid Propellant Case - POSTER |
| 335. |
STANČEKOVÁ Dana |
University of Zilina, Žilina, Slovakia, EU |
| Investigation of Defects Forging Tools by Nondestructive Detection Method - POSTER |
| Co-authors CZÁN Andrej, DERBAS Michal |
| 336. |
STANEKOVÁ Hana |
Institute of Materials & Machine Mechanics SAS, Bratislava, Slovakia, EU |
| Creep Damage Characterisation of Intermetallic Ti-46Al-8Ta Alloy Under Thermal Cycling Creep |
| Co-authors LAPIN Juraj |
| 337. |
STAWARZ Marcin |
Silesian University of Technology, Gliwice, Poland, EU |
| Influence of Technological Parameters on the Microstructure of the Silicon Cast Iron |
| 338. |
STRÁSKÝ Josef |
Charles University in Prague, Prague, Czech Republic, EU |
| Relationship between Elastic Modulus and Strength of Biomedical Titanium Alloys with Nb, Zr, Ta, Fe and Si Content |
| Co-authors JANEČEK Miloš, HARCUBA Petr, LANDA Michal |
| 339. |
STRNADEL Bohumír |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Effect of Tensile Test Specimen Size on Ductility of R7T Steel |
| Co-authors BRUMEK Jan |
| 340. |
STRÜBBE Carsten |
University Politehnica of Timisoara , Timişoara, Romania, EU |
| High Temperature Behaviour of HVOF sprayed Ni-Cr-B-Si-Coatings, subjected to Thermocycling at 600, 700 and 800°C - POSTER |
| Co-authors SERBAN Viorel-Aurel, MARGINEAN Gabriela, BRANDL Waltraut |
| 341. |
STŘÍLKOVÁ Lucie |
Material and Metallurgical Research Ltd., Ostrava, Czech Republic, EU |
| Study of High Temperature Properties and Microstructure of Heterogenous Welds Type P23/P91 during the Creep Exposure at 500, 550 and 600oC |
| Co-authors KUBOŇ Zdeněk, VODÁREK Vlastimil |
| 342. |
STUDNICKI Andrzej |
Silesian University of Technology, Gliwice, Poland, EU |
| Primary Crystallization of Chromium Cast Steel in Metastable Conditions |
| Co-authors KONDRACKI Marcin, SZAJNAR Jan |
| 343. |
SUCHÁNKOVÁ Kateřina |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Influence of Anticoagulants on Properties of transparent Water based Paint Systems - POSTER |
| Co-authors ŠRUBAŘ Petr, PODJUKLOVÁ Jitka, DVORSKÝ Richard, BRUMEK Jan, KOPAŇAKOVÁ Sylvie |
| 344. |
SZŁAPA Ilona |
BISPOL S.A. , Bielsko- Biała , Poland, EU |
| Evaluation of Corrosion Resistance of the Zinc Coatings on Component of the Ambulance |
| Co-authors HAJDUGA Maciej, WĘGRZYNKIEWICZ Sylwia, SOŁEK Dariusz, JERZEJCZYK Dariusz |
| 345. |
SZMAL Arkadiusz |
The Silesian University of Technology, Zabrze, Poland, EU |
| Condition and Prospects of Innovative Activity in the Steel Industry in Poland - POSTER |
| 346. |
SZURMAN Ivo |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Possibilities of Ti-Ni based Alloys Recycling - POSTER |
| Co-authors KURSA Miroslav, KOCH Daniel |
| 347. |
SZUTER Tomasz |
Silesian University of Technology, Gliwice, Poland, EU |
| Investigation of Mechanical Properties of Composite Skeleton Casting |
| Co-authors CHOLEWA Miroslaw, HUFENBACH Werner, CZULAK Andrzej |
| 348. |
ŠALGÓ Kristián |
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU |
| The X-Ray Diffraction Analysis of Phase Evolution in Zn-Al-Mg Coating Layer |
| Co-authors KUSÝ Martin, ŠALGÓ Kristián, GOGOLA Peter |
| 349. |
ŠEDÁ Petra |
Institute of Physics ASCR, v.v.i. , Prague, Czech Republic, EU |
| Dynamic Recrystallization during ECAP of Magnesium Single Crystal - POSTER |
| Co-authors JÄGER Aleš, LEJČEK Pavel |
| 350. |
ŠEVČÍKOVÁ Xenie |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Mechanical and Corrosion Properties of Galvanic Coatings based on Zinc - POSTER |
| Co-authors KREJČÍ Lucie |
| 351. |
ŠIMEČEK Jiří |
University of West Bohemia, Pilsen, Czech Republic, EU |
| Influence of the Surface State inducted by different Machining Technologies |
| Co-authors KŘÍŽ Antonín |
| 352. |
ŠMILAUEROVÁ Jana |
Charles University in Prague, Prague, Czech Republic, EU |
| Ageing Study of TIMETAL LCB Titanium Alloy - POSTER |
| Co-authors JANEČEK Miloš |
| 353. |
ŠPIČKA Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Prediction of a Heating Process in Continuous Furnaces with Regard to the Economy of Operation |
| Co-authors HEGER Milan |
| 354. |
ŠTĚPÁN Karel |
Matex PM, s.r.o., Pilsen, Czech Republic, EU |
| Laser cold-wire welding |
| Co-authors MÍŠEK Michal, NĚMEČEK Stanislav |
| 355. |
ŠTĚPÁNEK Ivo |
University of West Bohemia, Pilsen, Czech Republic, EU |
| Utilization of Micro-indentation Methods for Evaluation of the Degradation Rate of Polymeric Materials at Extending Equipmen Lifetime of the Safety-related Systems of Nuclear Power Plants |
| Co-authors TENGLER Marek, SLADKÁ Jana |
| 356. |
ŠTĚTINA Josef |
Brno University of Technoly, Brno, Czech Republic, EU |
| Operational Experiences with the Secondary Cooling Modification of Continuous Slab Casting |
| Co-authors KLIMEŠ Lubomír, MAUDER, Tomáš, MASARIK Miloš, KAVIČKA František |
| 357. |
ŠVEC Pavel |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Modeling of Circle Crystallizer |
| Co-authors DAVID J., FRISCHER R. |
| 358. |
TARDY Paul |
Association of the Hungarian Steel Industry, Budapest, Hungary, EU |
| Towards Cleaner Steel Industry: Requirements and Achievements - INVITED LECTURE |
| 359. |
THOMAS Piotr |
Kielce University of Technology, Kielce, Poland, EU |
| The Computer Simulation and the Experimental Research on the Stress Forces of the Combined Extrusion of Different Sized Aluminum Stampings - POSTER |
| 360. |
TITTEL Viktor |
Technical University in Kosice, Bratislava, Slovakia, EU |
| Wire Surface Roughness as Possible Criteria for Evaluation of Dies Wear |
| Co-authors ZELENAY Miroslav, KUDELAS Luboš |
| 361. |
TKACZ Jakub |
Brno University of Technology, Brno, Czech Republic, EU |
| Protection of Magnesium Alloys - POSTER |
| Co-authors ZMRZLÝ Martin, WASSERBAUER Jaromír, KOUBA Jan |
| 362. |
TKADLEČKOVÁ Markéta |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Effect of Boundary Conditions of Casting on Size of Macrosegregation in Heavy Steel Ingots |
| Co-authors MACHOVČÁK Pavel, KOVÁČ Marek, GRYC Karel, MICHALEK Karel, SMETANA Bedřich, SOCHA Ladislav |
| 363. |
TKACHENKO Sergey |
Brno University of Technology, Brno, Czech Republic, EU |
| Tribological Properties of TI-SI-ZR Alloys |
| Co-authors DATSKEVICH Oleg, KULAK Leonid, PERSSON Cecilia, ENGQVIST Håkan |
| 364. |
TOŠENOVSKÝ Filip |
Silesian University, Karviná, Czech Republic, EU |
| Stochastic Control of Process Times based on Working Performance |
| 365. |
TOŠENOVSKÝ Josef |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Analysis of Robust Technology Design Methods |
| Co-authors TOŠENOVSKÝ Filip, KUDĚLKA Ondřej |
| 366. |
TRNÍK Jaroslav |
Alexander Dubček University of Trencin, Púchov, Slovakia, EU |
| Microstructural Turbine Blades Analyses after Endurance Test of Aircraft Engine - POSTER |
| Co-authors KIANICOVÁ Marta, KAFRÍK Ján |
| 367. |
TURCZYN Stanislaw |
AGH University of Science and Technology, Cracow, Poland, EU |
| Analysis of Metal Flow during Rolling of Z-section Sheet Pile |
| Co-authors DZIEDZIC Michal, KUZMINSKI Zbigniew |
| 368. |
UNUCKA Petr |
MATERIAL AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU |
| Physical Modeling of Seamless Tubes Producing |
| 369. |
USTYUGOVÁ Tatiana |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Fuzzy Logic Model for Evaluation of Lean and Agile Manufacturing Integration |
| Co-authors NOSKIEVIČOVÁ Darja |
| 370. |
UTU Dragos |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Structural Transformations in Bimetallic Continuous Welded Saw Blades - POSTER |
| Co-authors OCHIAN Dumitru, MITELEA Ion |
| 371. |
VÁŇOVÁ Petra |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| The Effect of Heat Treatment on the Structure of Scale Layer and its Removing by Pickling in Reducing Melt - POSTER |
| Co-authors PĚNČÍK Roman, ČEMPEL David, KONEČNÁ Kateřina |
| 372. |
VÁVRA Jan |
University of Pardubice, Pardubice, Czech Republic, EU |
| Application of Social Life Cycle Assessment in Metallurgy |
| Co-authors BEDNARIKOVÁ Marie |
| 373. |
VILAMOVÁ Šárka |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Selected Aspects of Marketing Management Metallurgy Companies - POSTER |
| Co-authors JANOVSKÁ Kamila, KOZEL Roman, BESTA Petr, ČECH Martin |
| 374. |
VLACH Martin |
Charles University in Prague, Prague, Czech Republic, EU |
| Microstructure and Mechanical Properties of the Cold-Rolled Al-Mn and Al-Mn-Sc-Zr Alloys |
| Co-authors STULÍKOVÁ Ivana, SMOLA Bohumil, KUDRNOVÁ Hana, KEKULE Tomáš, MÁLEK Jaroslav, OČENÁŠEK Vladivoj, TANPRAYOON Dhritti and NEUBERT Volkmar |
| 375. |
VLASÁK Tomáš |
SVÚM a.s., Prague, Czech Republic, EU |
| Creep Strength Decrease of Cast Steel P91 Weldments - POSTER |
| Co-authors HAKL Jan, NOVÁK Pavel, SOCHOR Jiří, ČECH Jan |
| 376. |
VODÁREK Vlastimil |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Microstructure Characterization of GOES after Hot Rolling and Cold Rolling + Decarburization Annealing |
| Co-authors Jan HOLEŠINSKÝ, Anastasia MASLOVA, František FILUŠ, Šárka MIKLUŠOVÁ, Ondřej ŽÁČEK |
| 377. |
VODĚROVÁ Milena |
ICT in Prague, Prague, Czech Republic, EU |
| Thermal Stability of Rapidly Solidified Al-Fe-X Alloys |
| Co-authors NOVÁK Pavel, MICHALCOVÁ Alena, VOJTĚCH Dalibor |
| 378. |
VODIČKOVÁ Věra |
Technical univerzity of Liberec, Liberec, Czech Republic, EU |
| The Effect of Zr content on the Phase Structure OF Fe Al-Xc Type Intermetallic Alloys - POSTER |
| Co-authors KRATOCHVÍL Petr, DANIŠ Stanislav, ŠVEC Martin |
| 379. |
VOLÁK Josef |
Research and Testing Institute Plzen, Pilsen, Czech Republic, EU |
| Comparison of Results Correlations of the Steels P91, P92 and 15 313 after Creep SP Test - POSTER |
| Co-authors BUNDA Zbyněk, CHVOSTOVÁ Eva |
| 380. |
VOLOKITIN Andrey |
Karaganda State Industrial University, Temirtau, Kazakhstan |
| Research of a New Method of Deformation - "Pressing - Drawing" on Mechanical Properties of Steel Wire |
| Co-authors LEZHNEV Sergey, NAIZABEKOV Abdrakhman |
| 381. |
VONTOROVÁ Jiřina |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Characterization of the Friction Layer Formed on the Cast Iron and Stainless Steel Brake Discs during the Friction Test - POSTER |
| Co-authors MATĚJKA Vlastimil, VACULÍK Miroslav |
| 382. |
VOSTŘÁK Marek |
University of West Bohemia, Pilsen, Czech Republic, EU |
| Laser Re-melting of HVOF Sprayed NiCrBSi Coatings |
| Co-authors HRUŠKA Matěj, HOUDKOVÁ Šárka, SMAZALOVÁ Eva, ŠVANTNER Michal |
| 383. |
VOTÁPEK Petr |
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU |
| NUMERICAL ANALYSIS OF PRODUCTION PROCEDURE OF ALLUMINIUM BELLOWS BY MEANS OF HYDROFORMING - POSTER |
| Co-authors ŘEHOUNEK Luboš, HYNEK Martin |
| 384. |
VRÁTNÁ Jitka |
Charles University in Prague, Prague, Czech Republic, EU |
| Experimental Study of Ultrafine-Grained Commercial Magnesium Alloy AZ31 Prepared by Severe Plastic Deformation Method - POSTER |
| Co-authors JANEČEK Miloš |
| 385. |
VÝROSTKOVÁ Anna |
Intitute of Materials Science , Košice, Slovakia, EU |
| Comparison of the Heat Affected Zones and Base Metals of 0.5-9 %Cr Steels to Hydrogen Embrittlement Sensitivity |
| Co-authors MACKO Roman, BLACH Juraj, ČIRIPOVÁ Lucia |
| 386. |
WALASEK Agnieszka |
Silesian University of Technology , Gliwice, Poland, EU |
| The Description of the Mechanism for the Alloy Layer forming Process based on the Experimental Examination |
| Co-authors SZAJNAR Jan, BARON Czesław |
| 387. |
WASSERBAUER Jaromír |
Brno University of Technology, Brno, Czech Republic, EU |
| Electroless Nickel Coating of Magnesium Alloys - POSTER |
| Co-authors ZMRZLÝ Martin, TKACZ Jakub, KOUBA Jan |
| 388. |
WĘGRZYNKIEWICZ Sylwia |
The University of Bielsko-Biala, Bielsko-Biala , Poland, EU |
| The Influence of Side Surface of the Single Link on the Nature |
| Co-authors JĘDRZEJCZYK Dariusz, SOŁEK Dariusz, SZŁAPA Ilona, HAJDUGA Maciej |
| 389. |
WICHER Pavel |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Inventory Planning and Control of Electrodes for Electric Arc Furnace - POSTER |
| Co-authors LENORT Radim |
| 390. |
WITKOWSKI Krzysztof |
University of Zielona Gora, Zielona Góra, Poland, EU |
| Management of Production Orders in Metalworking Production - POSTER |
| Co-authors SANIUK Anna, SANIUK Sebastian |
| 391. |
WOJTASZEK Marek |
AGH - University of Science and Technology , Cracow, Poland, EU |
| Thermomechanical Processing of P/M Ti-6Al-4V Alloy |
| Co-authors ŚLEBODA Tomasz |
| 392. |
WRÓBEL Tomasz |
Silesian University of Technology, Gliwice, Poland, EU |
| Horiozntal contiuous Casting of Al and Al-Si Alloy in Semi-Industrial Conditions |
| Co-authors SZAJNAR Jan |
| 393. |
YILMAZ Senol |
Sakarya University, Sakarya, Turkey |
| The Effect of Pretreatment Realized on the Coating Powder on the Properties of Glass and Glass-Ceramic Coatings - POSTER |
| Co-authors ERCENK Ediz, BAYRAK Gunhan, AKINCI Akin, SEN Saduman, SEN Ugur |
| 394. |
ZIDANI Mosbah |
Université de Biskra, Biskra, Algeria |
| Characteristics of Copper Wire Drawn Distended for Electrical Cabling by Electron Back Scattering Diffraction - POSTER |
| Co-authors DENDOUGA F., MESSAOUDI S., BAUDIN T., DERFOUF C., BOULAGROUN A. & HELBERT A.L. |
| 395. |
ZIMINA Mariia |
Charles University in Prague, Prague, Czech Republic, EU |
| Comparison of Microstructures and Mechanical Properties of Conventionally Cast and twin-roll Cast AZ31 Magnesium Alloys |
| Co-authors HÁJEK Michal, BOHLEN Jan, LETZIG Dietmar, KURZ Gerrit, CIESLAR Miroslav |
| 396. |
ZIMOVČÁK Peter |
U. S. Steel Košice, s.r.o., Košice, Slovakia, EU |
| Texture Development during Recrystallization Process of HS-IF Steels - POSTER |
| Co-authors NIŽNÍK Štefan, ČERNÍK Martin, GRABAN Juraj, KUČERA Ivor |
| 397. |
ZMRZLÝ Martin |
Brno University of Technology, Brno, Czech Republic, EU |
| Corrosion of the Plane-Steel Pipeline - POSTER |
| Co-authors KOUBA Jan, WASSERBAUER jaromír, TKACZ Jakub |
| 398. |
ZRNÍK Jozef |
COMTES FHT Inc., Dobřany, Czech Republic, EU |
| The Way to Modify Ultrafine Grain Structure of Medium Carbon Steel |
| Co-authors KRAUS LIbor, DOBATKIN Sergey |
| 399. |
ZUNA Petr |
CTU in Prague, Prague, Czech Republic, EU |
| Evaluation of Kinetics of Austenite Graingrowth of Selected Steels used for heavy Forgings |
| Co-authors Jakub HORNÍK, Jaroslav MÁLEK, František JANDOŠ |
| 400. |
ZUSKÁČ Martin |
VSB-Technical University of Ostrava, Ostrava, Czech Republic, EU |
| Usage of Data Mining Methods for Control Support of Crystallizer Lifetime - POSTER |
| Co-authors DAVID Jiří, FRISCHEROVÁ Lucie |
| 401. |
ZWOLIŃSKA Bożena |
AGH University of Science and Technology, Cracow, Poland, EU |
| Types of Waste Streams Created in Steelworks |
| 402. |
ZÝKA Jiří |
UJP PRAHA a.s., Prague, Czech Republic, EU |
| Mechanical Properties and Microstructure of IN713LC Nickel Superalloy Castings - POSTER |
| Co-authors ANDRŠOVÁ Irena, PODHORNÁ Božena, HRBÁČEK Karel |
| 403. |
ŽALUDOVÁ Monika |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Experimental Conditions on Data Obtained by Thermal Analysis Methods |
| Co-authors SMETANA Bedřich, ZLÁ Simona, DOBROVSKÁ Jana, ROSYPALOVÁ Silvie, PETLÁK Daniel, SZURMAN Ivo, ŠTVRTŇOVÁ Alice |
